How to disassemble the kitchen faucet

There is no need to disassemble other accessories, twist the two hoses counterclockwise from the angle valve, take out the whole faucet, and then grab a hose from the bottom of the faucet and twist it out counterclockwise. As shown in the figure, the installation diagram is for your reference.

If you get under the sink and unscrew the copper or stainless steel ring that connects the faucet, you can remove it.

poison on September after burying

Tools: screwdrivers, wrenches and pliers. Here's how.

1.Remove the small screws on or behind the faucet handle, and then remove the handle that is fixed to the faucet body. A small number of faucet screws will be under the plastic buttons, metal buttons or plastic sheets, and as soon as the buttons are opened, you will see the handle screws mounted on the top.

For faucets that have been used for a long time or have not been used for a long time, its screws may become very tight due to rust and other reasons, if this happens, you can choose to drip some lubricating oil into it. Grip Xun.

2.If the screw is hidden in the hole, it is recommended to use a flashlight to observe, which is mainly to see if the fixing screw inside is a cross or a slot, and then use the corresponding screwdriver to loosen. The screw of a few brands of faucets is an inner square hole, which is more troublesome to disassemble, and special attention should be paid not to damage the screw mouth when using alternative tools.

When the screw is released, the handle can be removed.

3.At this point, you will see a large copper nut, first remove the nut with a large movable wrench, and then you can remove the spool of the faucet. Observe whether the copper plane under the valve core has uneven sand particles without fine branch seepage, and remove it cleanly.

The faucet can be said to be an indispensable appliance in life, it can be said that the frequency of its use is also relatively high, if you do not choose the right one, it is easy to fail, and then it will be dismantled for maintenance. Let's introduce to you how to disassemble the kitchen faucet.

How to disassemble the kitchen faucet

1. First of all, close the sluice gate at home to prevent water spraying during operation.

2. Next, remove the pipe of the water outlet first, and at the same time remove the pipe connected to the reservoir.

3. At this time, the faucet can be taken out, and then the new faucet can be put on the cistern.

4. Connect the pipe to the reservoir together.

> what material is good for faucets.

1.Stainless steel faucet.

In fact, stainless steel faucets are still very good, and now more people use a faucet, which can be made of this faucet material without lead, and acid and alkali resistance, does not release some harmful substances, and it does not need electroplating, as long as the surface is polished.

2. All copper faucet.

The quality of this faucet depends on its own copper content, but also to see the level of technology, if it is made of all copper, and the surface will have chrome plating leakage treatment, it can be said that the gloss of this faucet will be higher, and its corrosion resistance and wear resistance will be better.

>3. Plastic faucets.

The faucet of this material can be said to be safer to use, mainly it is processed from ABS plastic, so it will be richer in color, and more consumers will choose one, but this faucet is not strong enough, and the life of use will be relatively short.

4. Alloy faucet.

The price of this material faucet will be lower than that of all-copper, and it can also be mass-produced. However, the faucets of this material are made of zinc alloy, and we all know that this material will cause some harm to the human body, and it is not durable.

5. Ceramic faucet.

It can be said that the advantage of this material faucet is that it will not oxidize, it will not rust, and the appearance is also beautiful and generous.

> summary: about how to disassemble the kitchen faucet related content is introduced here, you must follow the above methods to disassemble the faucet, if you want to know more about the relevant knowledge, you can pay attention to the return of friends to our Qeeka home network to consult.

1. How to disassemble the kitchen faucet Prepare tools first: screwdrivers, wide or wrenches and pliers. If it's just a replacement of the faucet calling part, then prepare this part and close the main valve.

Then remove the small screws on or behind the faucet handle, and then remove the handle that is fixed to the faucet body. The faucet screws are hidden underneath the metal buttons, plastic buttons, or plastic sheets, and if you open the buttons, you will see the handle screws mounted on the top.