What s going on with the smart toilet not leaving water after flushing

Updated on Toilet 2024-05-02
13 answers
  1. Anonymous users2024-01-23

    Hello, dear, what's going on with the smart toilet not leaving water after flushing? 1.Because the nozzle is clogged, it needs to be removed and cleaned.

    2.There is a foreign object in the water tank, in this case, first pull out the power plug, remove the entire cover, and then clean the water tank. 3.

    If there is an abnormality in the receiver switch or sensor in the toilet, you should seek professional help to repair and replace it.

  2. Anonymous users2024-01-22

    Did you fix it later, friend? My toilet suddenly appeared tonight and the same situation, it was fine before, and suddenly there was no water sealing, and there was a clicking sound when flushing

  3. Anonymous users2024-01-21

    What happens when the smart toilet does not leave water after flushing?

  4. Anonymous users2024-01-20

    Is it solved? The same failure, can you talk about the solution.

  5. Anonymous users2024-01-19

    Hello, have you repaired it, my toilet has this kind of problem today.

  6. Anonymous users2024-01-18

    The cylinder water seal is not tightly sealed, just contact the factory to replace it.

  7. Anonymous users2024-01-17

    The smart toilet does not run water after flushing, which should be more convenient to use, so I think this flush will not flow after flushing, so it will be more clean and tidy to use.

  8. Anonymous users2024-01-16

    It may be a problem with the smart toilet seat or system charging, so it should be repaired as soon as possible so that it can be used normally.

  9. Anonymous users2024-01-15

    The flushing principle of smart toilets is actually similar to that of ordinary toilets, which are basically divided into direct flush and siphon type. The former uses the pressure of water to flush out the dirt, while the latter mainly uses the suction caused by the bent water pipe to suck out the dirt. The smart toilet is just changing the mechanical type to the electromagnetic type, using chip control to free our hands and bring us a better toilet experience.

    But in addition to the flushing principle, the more attractive benefit of the smart toilet is the cleanliness, the siphon flush plus the 360° vortex method makes the toilet more clean, and the flushing nozzle has a self-cleaning function, which is safer and more secure to use.

    The automatic flushing of the smart toilet is through the induction device in the seat to sense whether the person is out of the seat before flushing (generally the seat will be posted on a self-adhesive mark to indicate the sensing position), if it doesn't work, it is likely that the induction is broken, or the butt does not sit in this position when the seat is placed.

    If the spray rod comes out of the water, it is normal, because the spray rod self-cleaning should come out of the water first; If it is water from other places, you can consult the sales of the brand you buy, and the reason for the water is different in different situations.

  10. Anonymous users2024-01-14

    It should be broken, it is recommended to find a maintenance master.

  11. Anonymous users2024-01-13

    It may be that the water in your house has stopped, and it is the last bit of water that is flushed. It's also possible that the rehydration hose isn't plugged into the hole.

  12. Anonymous users2024-01-12

    Hello! The smart toilet can be set up, in fact, it has more functions than ordinary toilets.

  13. Anonymous users2024-01-11

    Because the nozzle is blocked, then the nozzle should be pulled out for cleaning, and when cleaning, a soft cloth should be used to wipe it with water.

Related questions
5 answers2024-05-02

If there is no water tank, the water pressure is relatively low, which may result in insufficient impulse.

2 answers2024-05-02

You can try to lower the water level of the water tank, and the suction power will be smaller if the flush pressure is smaller.

15 answers2024-05-02

The smell of the toilet bowl is generally not the smell of the toilet bowl but the odor that comes out of the floor drain, because the floor drain is connected to the sewer of the toilet, and the odor in the toilet bowl is generally from the floor drain. This is because the curved pipe under the floor drain is not installed. When decorating, there should be an anti-odor curved sewer pipe under the floor drain, this curved sewer pipe can prevent the smell from coming back to the room, because the curved pipe can isolate the odor in the curved part, and when there is water to drain, the smell will be washed down together, which is scientific, but some decoration personnel who have no conscience or understand these principles at all will save trouble to save the curved pipe, which will lead to the smell back. >>>More

1 answers2024-05-02

Explain that the sewer pipe, the sewer is not smooth, and the pipe is blocked, it is recommended to ask someone to clean the pipe.

2 answers2024-05-02

The compression is broken, and the water stops.