-
Anonymous users2024-01-24I hear your question as if the toilet tank is full of water, and the excess water keeps flowing out of the overflow. If this is the case, the ball valve in the tank does not float, so naturally the inlet valve cannot be closed, and the water continues to flow in, and of course it will continue to flow out of the overflow! Just fix the float part!
If you don't know much about the structure of the water tank, there is a simple way, close the valve in front of the water tank, look for it along the water tank, you can find it within one meter, and you won't run water from the overflow immediately after closing! Remember, you have to open this angle valve when you run out of water, or you won't even run out of water to flush the toilet!
If the float is fine, and the float control valve is still leaking, the only way to replace the new valve is to replace it, which is generally sold in hardware stores, which is a float with a switch, and you should be able to replace it yourself, that is, you need a pipe wrench or a large wrench, and a small amount of water adhesive tape; Close the angle valve in front first, replace the failed float control valve, and replace it with a new one!
-
Anonymous users2024-01-23There is a suction cup at home, if it is convenient to buy, buy one, five or six yuan, very useful.
If it's not convenient to buy, simply call someone to unclog the pipe.
The property management company should have such a phone number. Ask the security guard.
Disassemble the connecting rod on the top for cleaning.
The overflow of the toilet bowl is caused by the failure and failure of the floating water inlet switch!
It is a force arm float, loosen the root screw, adjust the float to the low water level, and then tighten the screw, there is a vertical type, there is a pole, forward and reverse, you can adjust the height of the float.
The float switch in the toilet flushing system is actually designed according to the principle of lever, the water tank pipe does not release water, the water will still slowly fill up, overflow, this situation is generally the reason for the water level is too high, you just need to twist the small screw of the top switch at the other end of the float in the clockwise direction a few times, adjust to the suitable position you need. If it's a pole type, you press and hold the float adjustment button and press it down directly to adjust it to the position you need to fit.
The water tank is overflowing, it must be that the water level is too high, and the high water level means that the water inlet valve in the tank accessories does not work, and there is no way to stop the water automatically, so why can't it stop the water? There are two situations, the first is the quality of the inlet valve itself, the second is caused by improper installation, but the improper installation generally occurs during the period of just decoration, if it is used well a few days ago, and the toilet bowl has not been touched, it will suddenly overflow, indicating that the inlet valve is faulty, and then it is necessary to replace an inlet valve >>>More