What should I do if the bathroom is decorated and the floor tiles are leaking

The waterproof is not done, find a plumber to check it, see if it is the problem of that location, the small problem plumber can get it for you, or dismantle and redo, first find a plumber to check it, Guiyang Xianghe decoration for you to answer.

There is a leak in the bathroom floor tile, we need to carefully analyze the reasons why this problem occurs, and what is the reason for the analysis We mainly look at the leakage of pipes and surface leakage. Pipeline leakage is said to be the upper and lower water pipes, floor drains and toilet interfaces and other defects caused by defects, its inspection method can be the upper water pipe leakage and the lower pipe leakage, the water pipe leakage is manifested as the leakage has continuous, uninterrupted situation, sometimes there will be a phenomenon of increased leakage. In such a situation, you can close the main valve of the water pipe and the leakage will be reduced immediately.

If there is a leak in the sewer pipe, first observe the leakage amount, and make a record, you can open all the faucets, toilets and flush the water multiple times and pour water into the floor leak, if the leakage increases, it means that the pipe is damaged and leaking. If there is a surface leak and the bathroom is still wet without spilling water on the floor, you can determine that the water pipe is broken. In the case of water leakage in these two situations, you can pry open the part with the buried water pipe, bury the new water pipe in it, and then apply waterproof materials, and then lay the tiles, and wait for the tiles to be more stable, and then use caulk to plug the direct gaps of the tiles, and wait until these are all dry before use, it is best to take 24 hours to touch the water.

The first step of the bathroom wall appears water seepage, should be water peeling, etc., generally caused by the leakage of the bathroom, find a professional plumber to check whether the pipe is ruptured and cause water leakage, etc., if it is a problem with the pipeline, you need to replace and repair the pipeline in time to solve the problem of water leakage, if the pipeline is no problem, then consider the waterproof layer is not done well caused by the leakage, if the local water leakage is serious, do the waterproof again so that the problem can be fundamentally solved.

If you find a water leak after the bathroom tile is pasted, you need to analyze the cause of the leakage before you can deal with it. The first reason may be the rupture and leakage of the water pipe, in this case, we first have to find out where the leakage point is, generally speaking, if the water pipe is leaking, the amount of water will be relatively large, and it will last for a long time. If there is a leak in the sewer pipe in the washbasin or the toilet, we can directly pour some water into it to detect it.

If the water pipe is leaking, then we will stop using the bathroom for a few days, and if we find a water leak, it is the problem of the water pipe. There are two ways to deal with the leakage after confirming it, the first is to directly destroy the surface of the tile and dig out the water pipe again for repair and replacement, which is more troublesome. The second way is to directly use open pipes, which may not be very good for the aesthetics of the pipes.

The second reason may be the problem caused by floor drains, which is a relatively common leakage problem, and there are many reasons for this problem. One of them is that if a washing machine is placed in the bathroom, then many residents usually make a floor drain of the washing machine drain, that is, the washing machine drain pipe is directly connected to the floor drain.

There is a problem here, if the drain pipe of the washing machine is too big and the floor drain is too small, the speed of the washing machine drainage is faster than the speed of floor drainage, and there will be a backwatering situation, that is, the water discharged by the washing machine is poured back. In this case, there are two solutions, the first is to replace the floor drain, but this method may not be applicable, because many of the floor drain drains on the floor are of a fixed size. The second way is to replace the drain pipe of the washing machine with a smaller one.

If there is a good glass glue, the glass glue will leak, and it will age after a long time. If you want to have no trouble, it's better to knock it out and post it anew.

First, remove the tiles and redo the waterproofing. Second, you can go to the building materials chemical store to buy that kind of special waterproof glue, there are imported and domestic, the effect is the same, is two kinds of glue stirred together, one is more transparent, the other is less white like toothpaste, the two are evenly stirred together It is available, when you need to clean the seam that needs to be smeared and thoroughly dry it with a hair dryer before it can be used, it will be completely dry after only half an hour after applying, and it will definitely not leak after such treatment. This glue is generally available in building materials and chemical stores, and you tell them that they are leak-proof glue, and they know it.

Since I'm not a professional and don't use it often, I forgot the name. Pay attention to apply leak-proof glue to the seams, so as to prevent water seepage. If you are careful that you can't do it well, you can also ask the master to do it, but you must be present from beginning to end.

In order to avoid that some places are not dealt with properly, the purpose of preventing water seepage will not be achieved, and the previous efforts will be wasted. I think it's better to do it yourself, it's very easy, it's more important to deal with the crevices clean and dry, just pay attention to it.