In the bathroom, there was a lot of water on the floor from under the bricks

Updated on Bathroom 2024-05-22
2 answers
  1. Anonymous users2024-01-24

    If the water pipe buried underneath is broken, it is necessary to dig out the ground and make it all over again. If it is water on the surface, it is enough to install the floor tiles from scratch.

  2. Anonymous users2024-01-23

    Re-pave the tiles in the bathroom so that there is a slope to the floor drain in all directions.

Related questions
What's going on with water seeping from under the floor tiles in the bathroom
3 answers2024-05-22

The water pipe is leaking, and you need to find out if it is repaired. >>>More

When the water on the floor in my bathroom doesn't dry out, there are a lot of bugs
1 answers2024-05-22

It should be bred and drilled out of the sewer, and it is recommended to spray insecticide and pour some insecticide into the floor drain

What should I do if the water on the floor of the bathroom does not leak and is so ugly?
1 answers2024-05-22

It is necessary to do a "waterproof layer".

Apply 2 to 3 layers of waterproof paint and leave to be applied. >>>More

There is one less floor drain in the bathroom, and the peonies are drilled from the ground as needed
1 answers2024-05-22

Unless you know the location of the sewer pipe, you can't punch the hole.

There is a water pipe pulled by a plumber on the ground of the bathroom of the new house, how to do
1 answers2024-05-22

Use cement leveling, and at the same time use glass water to make waterproofing on the cement surface, and finally the waterproof material is glued to the cement with a blowtorch, and the surrounding area should be higher than the floor tiles.