How to solve the collapse of the plate made by the panel furniture cutting machine?

I remember watching carpenters make furniture in my hometown, whether it was a cook or a cabinet, all the templates were made by the carpenter by hand. The current panel furniture materials are made by the cutting machine, and the surface of the board made by the cutting machine is smoother, and there will be no error in the size. But there are also some panel furniture cutting machine out of the board chipping, what is the reason for this?

1. The reason for the material of the plate

Some low-cost panel furniture is made of relatively inexpensive materials, such as MDF, particleboard, etc. These sheets are inexpensive and easy to process, but they are prone to chipping during pressing due to weak adhesion.

If there is a problem with the material of the plate, it must be replaced with a good quality plate, so that the problem of plate chipping can be solved.

2. The problem of the cutting machine

If the plate material is good or there is a problem of edge breaking, then the reason must be found from the cutting machine. If the cutting machine's edge is not sharp enough, there will also be a problem of plate chipping. At this time, better tools are needed, and attention should be paid to the maintenance of tools.

The adsorption force of the table surface of the cutting machine is not strong, which leads to the displacement of the plate, and the edge will collapse in the production process. This requires the manufacturer of the machine to do maintenance to strengthen the adsorption force of the table against the plate.

The speed of the cutting machine is not enough, and some of the plate materials are too hard, and the speed of the cutting machine is not enough, which will cause the plate to collapse. At this time, it is necessary to increase the speed of the cutting machine to avoid the problem of plate chipping.

3. Improper human operation

If the operator of the cutting machine is not familiar with the operation process, the use of the machine is not correct, and the position of the plate is not right, these may cause the plate to chip. At this time, it is necessary to find someone who is familiar with the cutting machine to operate, or train the current operator to ensure that they can use the cutting machine correctly.

InBefore the cutting machine is used, it must be fully inspected, and the cutting machine must be maintained frequently, so as to ensure the normal operation of the machine and avoid the waste of plates.

You can directly use tape to stick the edge that pops out, which will not affect the use, and basically all cutting machines will have such a situation.

The choice of the plate may not make us change, but we can choose a good CNC woodworking cutting machine, such as Jinan Zhongtang CNC cutting machine strictly controls the quality of the equipment, high-precision assembly, and will not cause the plate to collapse due to equipment reasons.

If there is a serious material, the best way to collapse is to use it, and the collapse buckle is locked, so that it can be well solved.