-
Anonymous users2024-01-23The first step is to install the cabinet. We can first put the wooden board on the left side of the cabinet on the ground, put a screw on the glued hole, and then fix the back pull bar and the screw together, and lock the lock handle. Then we need to install the top plate on it, so that we can see if the wardrobe has a simple appearance.
Next, the bottom plate is installed, the screw is installed on the bottom plate, and the corner strip is fixed, and the top plate and the bottom plate that have been assembled before are assembled together.
Now it's time to assemble the trouser racks and drawers. At the beginning, you can first take out the trouser rack and drawer of the solid wood wardrobe and put it aside, first install the screw on the side of the drawer, install the wooden board on the upper side, lock it and put the drawer into the drawer board, and then lock it with screws, and finally install the slide rails on both sides of the drawer, so that the drawer installation is completed. As for the trouser rack, first install a steel pipe on the tail plate of the trouser rack, put screws on both ends of the tail plate, and fix the two side plates of the trouser rack tightly, so that the trouser rack is also completed.
When the cabinet body, drawer box trouser rack is completed, and the cabinet is almost installed, and finally the cabinet door is installed, you can first put the door hinge on the solid wood door panel, tighten it with screws, and then lay the middle door hinge on all the door panels, and then tighten it tightly through the general screws and fix it on the cabinet. The handle of the wardrobe can be fixed on the door panel with screws, and the first door of the solid wood wardrobe is completed here, and the other one is firmly fixed using the same operation, so the whole solid wood wardrobe is assembled.
After the completion of the work, we should check how the effect is, to see if the door is relatively stable, whether the screws are tightened, etc., if there is no problem. Installing a solid wood wardrobe is not an easy task, if you have any hesitation, you must refer to the solid wood wardrobe installation step chart in time to avoid mistakes and rework.
1.Lay out the gasket and place the tools used on the spacer in turn. Open the product package, take out the product and place it on the gasket in turn. Inspect the product for damage and keep a record. >>>More
All rooms are leveled, the floor is marked, the floor is punched according to the regulations, the holes are stuffed with wooden sticks, the wooden keel is laid, the keel is adjusted according to the horizontal line, the floor is laid, the baseboard is installed, and the paint is touched.
First of all, you must be able to read CAD drawings, and you don't understand how you can install them.
1. Confirm the materials and sizes required for the decoration of the integrated ceiling, and purchase them from the corresponding manufacturers or merchants; >>>More
The first step is to install the cabinet. We can first put the wooden board on the left side of the cabinet on the ground, put a screw on the glued hole, and then fix the back pull bar and the screw together, and lock the lock handle. Then we need to install the top plate on it, so that we can see if the wardrobe has a simple appearance. >>>More