How to solve the toilet flushing sound very loudly

The toilet flushes loudly and loudly, and most of them are caused by it.

It should be a water leak First, check the water meter to see if there is a water leak Second, close the water valve and release all the water, if it does not sound, it must be a water leak Third, you can adjust the floating float in the water tank Fourth, the probability of water tank plug leakage is small If there are none of the above four, there is basically no water leakage. Hope to adopt.

1. What to do if the toilet flushes too loudly - the sewer pipe is covered with rubber.

Generally, the main reason for the excessive noise of toilet flushing is that the toilet drain pipe is not enclosed in the wall and is exposed.

The noise of the water pipe on the surface is naturally very loud without the sound insulation of the wall. For this phenomenon, just wrap it around the outside of the toilet drain.

A layer of rubber or a layer of asphalt paint can effectively reduce the noise of toilet flushing.

Second, what to do if the toilet flushing sound is too loud - pipe silence.

Similarly, if it is determined that it is a water pipe problem, when the toilet flushing sound is too loud due to the lack of sound insulation of the pipe, you can use insulation material to wrap it.

Toilet drains, as well as adding a layer of foam board to the bathroom ceiling, can reduce noise, and these materials are readily available on the market.

Isn't it great to buy it and not be expensive, and to solve the problem effectively at a small cost?

Five ways to solve the loud flushing of the toilet - adjust the direction of the water pipe.

3. What to do if the toilet flushing sound is too loud - adjust the direction of the water pipe.

Once you find that the toilet flushing noise is excessive, when making sure that there is nothing wrong with the water pipe, just lock the toilet and close the toilet tank lid.

Lift it and adjust the direction of the white water pipe inside the water tank to the inner wall of the water tank to effectively reduce the flushing noise.

Fourth, what to do if the toilet flushing is too loud - install a sound insulation layer.

When decorating the bathroom, you can add a layer of sound-absorbing rock wool or polystyrene board to the ceiling to dampen the sound. It should be reminded that due to the stone wool and other specialized.

Industrial materials can cause some damage to the skin, so it is necessary to ask a professional company or professional to handle it.