-
Anonymous users2024-01-24Four-point, in fact, don't have to be so troublesome, just go to the plumbing store to buy a fifty-centimeter long.
-
Anonymous users2024-01-23Unscrew the cap from the bottom of the water inlet pipe of the water tank (at the bottom of the water tank, below the black rubber pad), and the water inlet pipe and accessories can be taken out of the water tank.
Toilet inlet hose installation.
1. Turn off the main water valve at home before installation, and then use a board to remove the leaking and cracked water pipe.
2. One end is connected to the water pipe, and the other end is connected to the toilet inlet (professionals can install without raw tape). If the strength is small, you can first wrap a few circles of raw tape on the thread buckle, and then put on the thread and tighten it.
3. Test the boiling water pipe, and if it doesn't leak, it will be repaired.
Only exchange ten yuan or dozens of yuan for yourself. Asking someone to exchange may be tens to hundreds of yuan.
The toilet is different, so you can buy a live board.
Sewers, through which everything in the toilet goes into the city sewers.
Because the space is small and difficult to operate, it is true that it is more troublesome! Two wrenches are required to work at the same time.
If it is a pipe connected to the angle valve, it is OK to replace it with a high-pressure pipe. Pay attention to the length of the high-pressure hose when you buy it