-
Anonymous users2024-01-23Before laying bricks. Clean the ground. Then use waterproof materials for brushing and filling. Do not leave any dead ends. It is best to fill the joints around the pipe wall. The height of the wall brush in the shower position is best. The rest of the space is 40 cm.
-
Anonymous users2024-01-22Bathroom waterproofing, generally we will directly recommend the use of mortar waterproofing agent, not only with the base surface sticky firm, and high puncture strength, can be the same life as the building, simple construction, cost-effective is now the preferred material for home decoration waterproofing. It is necessary to pay attention to the construction according to the product construction instructions, so as to ensure a good waterproof effect.
1.Clean the construction site and sprinkle water to make it fully moist but there should be no stagnant water.
2.Wall: The total thickness of the waterproof layer (waterproof mortar + waterproof mortar) is not less than 10 mm for the wall, not less than 20 mm for the ground, and not less than 1800 mm for height.
1) Mix "Lauyer mortar waterproofing agent" with cement at 1:3 to form a waterproof mortar, and paint it once or twice on the base surface, with a total thickness of 2 mm.
2) After 20 minutes, after the waterproof mortar is dry, stir it into a waterproof mortar with "Laoyal" and cement and sand according to 1:2:6, and wipe it on the surface of the waterproof plain ash with a thickness of 8 mm.
After the waterproof mortar layer is solidified, it is cured by sprinkling water.
The waterproof floor of the bathroom needs to be all waterproof, and the waterproof height of the wall is at least to the meter, and it is recommended to do the full height!
It can be made of waterproof polypropylene, the bottom is all done, the wall can be made of meters high, and the closed water test is done well, and the bricks are paved without water seepage.
It is recommended to use a new type of environmental protection CF-2000 high-efficiency composite waterproofing agent, which is added to the mortar when making the hardened layer of the toilet floor, and the construction can be carried out by stirring evenly, and the cost of materials per square meter is only 6-8 yuan, the construction is convenient and fast, and the mortar concrete has the same life.
Brush silver powder, using oil-based solvents, benzene series. >>>More
It will leak, but you can do a repair layer at the drill hole, and you can use Longheng's flexible K11 waterproof coating, which is the most suitable for repairing various corners.
As you think, not all empty houses have to leak, and you don't need to. The whole building has pipes from top to bottom, you don't have to be empty, other people's will flow through yours.