-
Anonymous users2024-01-24Hello, the sanitary brick wall floor joint is the first to stick to the ground, first paste the floor tiles in the wall bricks to the same as the joint.
-
Anonymous users2024-01-23Answer: When laying tiles normally, the brick joints generally leave a gap of 1-3 mm, and the most common gap width of the bricklayer is 1 mm, mm and 2 mm. The specifications of the seam of the tile seam are and so on. Generally speaking, in addition to the retro bricks, which need to leave a large gap (5mm-10mm), other bricks are generally better than 3-10mm.
The wall surface is 1-2mm, which can be comprehensively decided according to factors such as the design style and layout of the house. For general household use, it is recommended to leave a gap of 2 3mm, so that it does not waste materials, and is simple and beautiful.
The price should be around 23-35 yuan per square meter. First of all, it depends on what specifications of floor tiles to choose. The specifications of floor tiles are generally divided into: >>>More
Please redescribe your problem, what to glue with, preferably to supplement the photo.
If there is no beauty sewing in the bathroom, you don't need to use tape to glue, you can use caulk to fill the gap, so that it can be used normally during use.
All with steel needles and flowers and grass, clean up but the caulk used is unqualified, with white cement or caulk that does not meet the requirements, the tile will move, thermal expansion and contraction, the unqualified caulk is squeezed out without ductility. It is recommended to buy some any brand such as Yuhong, JCDecaux, Henkel, Weber,,, etc.
How can the beauty sewing fade? Your beautiful seam falls off! If the seam falls off, it may be that the tile is loose, otherwise the seam will not fall off normally.