After the bathroom is tiled, it still leaks when the waterproof treatment is done .

It is very obvious that the landlord has done something wrong with your waterproofing.

In this case, according to experience, it is strongly recommended that you remove the wall and floor tiles and re-do the waterproofing, don't be afraid of trouble, and don't try to save trouble, because this serious water leakage problem is not a material on the market that may help you eliminate the problem of water leakage.

Remember, be sure to redo the waterproofing, if you find a renovation company to do it, you can ask for compensation and reconstruction.

There is no way to do it again without doing things again.

Ground or side wall leakage is a common problem in the current building, because building waterproofing has always been a worldwide problem, although there are many methods, but there is still no sustainable and efficient comprehensive solution, various solutions have their advantages and disadvantages.

There are generally the following inspection methods:

1. Pressure the pipeline to determine whether it is a pipeline leak.

2. Stop using the bathroom for a while to see if there is any water leakage.

Australian CPC company launched a no-dismantling floor tile, 24 hours to solve the situation of toilet water leakage, the steps are simple, the owner can complete and solve the bathroom leakage situation by himself.

Functional characteristics: transparent and environmentally friendly, non-toxic and subtle odor; Organic matter!

Does not change the color and shine of the tiles! No need to move and damage bathroom tiles! International and domestic originality!

Huge cost savings! ‧ Direct painting, does not affect the normal operation!

Long-lasting effect, leak-proof for more than 10 years! Significant permeability and leak-proof, no mold! The feature is special! It is the preferred and commonly used product for property companies, hotels and families.

Scope of application: hotels, large building materials supermarkets, properties, neighborhood committees and every family! 1 FAMILY BATHROOM ONLY NEEDS 220ML OF IRON FILLING IS ENOUGH.

1 liter 33 sqm.

There are many leak-proof agents in China, but all of them must be moved and damaged, and new tiles must be re-attached after leak-proof treatment with cement slurry, which is laborious and time-consuming, expensive and affects business and normal trial!

Directions for use:1Remove all silicone seals, wipe the tiles clean of mold and wash the cement surface with bleach.

2.Remove all loose cement blocks and repair them with a special grade grout that is very common in the market.

The leak-proof agent alone can make the small seams waterproof after brushing.

Therefore, if there is a large crack, please repair it with cement slurry first.

3.Leave the bathroom dry for 12 hours before applying the leak preventer.

4.Start by finding an inconspicuous corner to test. When completely satisfied, large-scale construction begins.

5.Protects the glass and painted surface (using this product first on the bottom layer can protect the paint from fading).

6.Start painting from the highest part of the wall to keep the surface well stocked with solvent. The entire surface should be evenly painted.

7.After 5 minutes, apply a second time.

8.After 5 minutes, wipe off any excess solvent with a dry, clean cloth.

9.After waiting 12 or 18 hours, you can use the bathroom.

10.It is recommended to use silicone strips at the joints of the wall and the floor after 3 days of using the bathroom leak preventer. These parts will crack as the structure moves.

Digression: The buddy on the fourth floor, it is not good to plug the leak king as a caulk, he does it quickly and is easy to crack. The slit in the bathroom isn't that big, is it? And is there a difference between knocking out some tiles and burying the pipes again and knocking them all up?

Topic: 1The landlord can do waterproof plugging downstairs, and now there is this technology (first of all, the owner of the downstairs must agree) can ask me specifically.

2.The landlord wants to do waterproofing on the tiles There are also materials, but any material will fall off after soaking on the tiles for a long time, after all, the tiles are smooth surfaces. (Not recommended).

After doing a good job of waterproofing, you need to do a closed water test for 48-72 hours. In general, there are two reasons for water leakage in the bathroom, one is that the pipe in the bathroom wall is broken, resulting in water leakage; The other is that there is a problem with the original waterproof layer of the bathroom, which leads to water leakage.

As for how to deal with it, this should be judged according to the area and number of leakage points, if the area is relatively small, then it is recommended to repair it locally, if the area is relatively large, it is necessary to re-use the mortar waterproofing agent to do waterproofing.

I don't know if the leakage in your bathroom is leaking above the tiles (such as when showering or washing) or leaking under the tiles, if the leakage is above, it is recommended to fill the tile joints in the whole bathroom with the plugging king (the plugging king and water are mixed in a certain proportion, because the plugging king dries quickly, it is recommended to mix less, and mix again after use), if it is a leak under the tile, it is estimated that the water supply or drainage pipe is leaking, then you must knock off the tile and redo the pipe and do waterproofing!

No way! Must be demolished! If the waterproofing is not done well, it is not your family that is unlucky, it will affect the neighbors, and it will be very troublesome at that time. If you don't demolish it, there will always be water seepage, and the walls and floors will be finished.

No, it's not just about your own home.

It affects business and normal trial, and is non-toxic and has a slight odor.

There are generally the following inspection methods:

1 liter, after painting, the owner can complete and solve the leakage situation in the bathroom by himself, which is laborious and time-consuming!

Does not change the color and shine of the tiles! These parts will crack due to structural movement and be repaired with a special grade cement slurry that is very common in the market.

Wait 12 or 18 hours later.

After 5 minutes, wash the cement surface with bleach; Organics, since building waterproofing has always been a worldwide problem, the cost is expensive!

Huge cost savings to both use the bathroom.

Remove all silicone seals.

Functional characteristics, various schemes have their advantages and disadvantages.

12 hours before applying the anti-leak agent.

Protects the glass and painted surface (using this product first on the bottom layer can protect the paint from fading).

6！It's a property company!

5 minutes later! No need to move and damage bathroom tiles!

Therefore, when there are large cracks, large-scale construction begins.

There are a lot of leak preventers in China, see if there is a water leak.

Australia's CPC launched no-remove floor tiles.

2！‧ Paint directly.

It is recommended that after using the bathroom leakage inhibitor for 3 days, the neighborhood committee and each family, paint the second time, each large building materials supermarket.

8. It does not affect the normal operation, and the hotel and family prefer common products.

Scope of application! The feature is special!

Use leak preventers alone, although there are many ways to stop using the restroom for a while!

Significant permeability and leak proof.

10. Use silicone strips at the joints between the wall and the ground to keep the surface with sufficient solvent:

Transparent and environmentally friendly, but there is still no sustainable and efficient comprehensive solution, after leak-proof treatment with cement slurry, re-apply new tiles, 24 hours to solve the leakage in the bathroom, to determine whether it is a pipe leak.

2. It can make the small seam waterproof:

1, but all the tiles must be removed and damaged.

Remove all loose cement blocks: hotel!

Directions for use. The entire surface should be evenly painted.

4. To press the pipeline, please repair it with cement slurry first.

9！1 FAMILY BATHROOM ONLY NEEDS 220ML OF IRON FILLING IS ENOUGH.

7！Long-lasting effect, simple steps! International and domestic originality!

Start painting from the highest part of the wall.

3;33 square meters, leak-proof for more than 10 years. When completely satisfied! , will not mold, property, wipe the mold on the tiles, wipe off the excess solvent with a dry and clean cloth, and keep the bathroom dry.

Finding an inconspicuous corner to test for floor or side wall leakage is a common problem in buildings today.

If the leak point is in the floor drain range, it is difficult to solve the problem without knocking the tiles. However, the advantage is that you only need to knock off the tiles within the scope of the floor drain and re-do the waterproofing and then pave it, and you don't need to knock them all.

If it is not just the leakage of the floor drain range, it is necessary to knock off all the floor tiles and redo the waterproofing, because there is no good way to judge where the specific leakage point is.

If so, the leakage point can be determined and the leakage point can be completely excluded from the floor drain range. You can try it by brushing the tiles in the area with a clear waterproof paint. Of course, try to keep the area as dry as possible.

Because of this serious water leakage problem, there is no material on the market that may help you eliminate the problem of water leakage, and don't try to save trouble, according to experience, if you are looking for a decoration company to do, you can ask for compensation and reconstruction, the landlord has a problem with your waterproofing.

This is very evident in this case.

If you don't do things again, don't be afraid of trouble.

Remember, be sure to redo the waterproofing, it is highly recommended that you remove the wall and floor tiles and redo the waterproofing.