-
Anonymous users2024-01-24Summary. What to do if the small knob of the anti-lock inside the anti-theft door is broken.
What should I do if the small anti-lock knob inside the anti-theft door is broken.
There are 7 rewards written in total.
Chestnut smash qwq
2019-04-09 TA received over 111 likes.
Concern. If the small anti-lock knob inside the anti-theft door is broken, it can be repaired by yourself, and only one ordinary pliers are needed.
Specific steps: 1. First open the door, bite the inner lock knob with pliers, and slowly unscrew it. This process may require some effort, so ask a man to help, be careful not to turn in the wrong direction.
2. After spinning, you will find that the tongue that is twisted out is crooked, carefully observe the direction of the skew, and use pliers to correct and pull back.
3. After that, adjust the position of the tongue and try to rotate the inner lock knob to see if you can successfully control the tongue. If you find that the knob is a little sluggish when rotating, you can continue to adjust the tongue, this is because the inner lock has not been used for a long time and is sluggish, you can try to apply some lead powder on the tongue to solve it.
How to change the small anti-lock knob inside the anti-theft door
Hello, I'm sorting out the answer to your question, so please wait a minute
What to do if the small knob of the anti-lock inside the anti-theft door is broken.
What should I do if the small anti-lock knob inside the anti-theft door is broken.
What should I do if the small anti-lock knob inside the anti-theft door is broken.
There are 7 rewards written in total.
Chestnut smash qwq
2019-04-09 TA received over 111 likes.
Concern. If the small anti-lock knob inside the anti-theft door is broken, it can be repaired by yourself, and only one ordinary pliers are needed.
Specific steps: 1. First open the door, bite the inner core locking knob with pliers, and slowly unscrew it. This process may require some effort, you can ask a man to help with the crack, be careful not to rotate in the wrong direction.
2. After spinning, you will find that the tongue that is twisted out is crooked, carefully observe the direction of the skew, and use pliers to correct and pull back.
3. After that, adjust the position of the tongue and try to rotate the inner lock knob to see if you can successfully control the tongue. If you find that the knob is a little sluggish when the knob rotates, you can continue to adjust the tongue, this is because the inner lock has not been used for a long time and is sluggish, you can try to apply some lead powder on the tongue to solve it.
-
Anonymous users2024-01-23Summary Hello, I hope mine is helpful to you.
Start by opening the two screws on the inside handle of the door, then remove the handle or install a new handle. Because most of the buttons are brought on the handle, the small iron piece inside the safety button in the hand should be inserted into the corresponding lock body hole before installation, and then directly press the handle to settle the screw. Finally, you can operate it yourself and check whether the replacement is successful.
How to change the small anti-lock knob inside the anti-theft door
Hello This is a very good question, I need a little time to answer, please be patient.
Hello, I hope mine is helpful to you. Start by opening the two screws on the inside handle of the door, then remove the handle or install a new handle. Because most of the buttons are brought on the handle, the small iron piece inside the safety button in the hand should be inserted into the corresponding lock body hole before installation, and then directly press the handle to settle the screw.
Finally, you can operate it yourself and check whether the replacement is successful.
If you don't have tools or materials, it is recommended to find a master who repairs the lock.
-
Anonymous users2024-01-22Either repair it yourself, or find someone to pick the lock, and the overall replacement of an ordinary lock is about one hundred and fifteen!
Change the anti-lock knob, it won't be too expensive, everyone has to eat! Almost.
-
Anonymous users2024-01-21Just find a lockpicking company to get it, they have professional tools.
If the small anti-lock knob inside the anti-theft door is broken, it can be repaired by itself, and only ordinary pliers are needed. >>>More
The lock knob inside the security door controls a deadbolt. With this small knob, when people are in the door, if they are too lazy to use the key to directly lock the anti-theft door, through this knob, it will save the situation of using the key to lock the door. Moreover, if the door is not locked inside, the door can be opened outside, but after using this small knob to reverse the lock, the security is improved. >>>More
Hello, hello, if the small knob of the anti-lock inside the anti-theft door cannot be screwed, it is generally because the position of the card slot in the lock is not correct or the anti-lock pin is bent. If you have a tool, you can take it apart to see, if the position of the card slot has changed, you can readjust it, if the lock pin is bent, then there is no way, you can only change the lock, but you must make sure that you will disassemble it, otherwise you will be troublesome if you disassemble it and can't install it, if it really doesn't work, please change the lock master to come back and help you get it. Hope it helps.
It is recommended that you consult with a professional staff who install the anti-theft lock door and ask them to help with the installation, because none of us are all-round champions.
This is to remove the inner handle, and then align it and install the handle.