Kitchen sink inlet pipe leaking, how to detect whether it is hot or cold water pipe leakage on the b

Updated on Kitchen 2024-05-04
3 answers
  1. Anonymous users2024-01-23

    First, first of all, you need to carefully inspect the kitchen water pipe to see where the water leakage problem is, if it is a water pipe joint leakage problem, you need to replace a new water pipe, if there is a leakage problem at the wire mouth, you need to remove it and install the rubber pad, and the white paint is thickly painted on the wire mouth, and wrapped with a ribbon.

    2. The inspection method is as follows.

    1. When there is a problem of leakage in the kitchen water pipe, we should first find the cause of the water pipe leakage, check which part of the water pipe is leaking, under normal circumstances, the water pipe joint and the drainage pipe and other places are the places where the water pipe often leaks.

    2. Before checking the cause of kitchen water pipe leakage, first check whether the indoor power supply is turned off, because water is easy to conduct electricity, which will cause safety accidents. After tightening the water pipe valve, fix the hose at both ends of the hot and cold water pipe, and fix the instrument on another water pipe in the same area, after increasing the water pressure, you can check whether the water pipe is leaking.

    3. If you can't check and deal with the leakage problem of the kitchen water pipe, you can first use a few rags to block the gap under the kitchen door to prevent water from penetrating into other areas, and then use a rag to absorb the water, and at the same time contact the maintenance master to repair the water pipe.

  2. Anonymous users2024-01-22

    If your hot water comes out of the water heater, you can disconnect the hot water outlet of the water heater and try again to see if there are any traces of leakage? If there is, the cold water pipe is leaking, and if not, the hot water pipe is leaking.

  3. Anonymous users2024-01-21

    Generally, plumber installation is to install water supply pipes in accordance with the hot water on the left and cold water on the right. Therefore, the inspection of hot and cold water pipes also follows this principle.

Related questions
1 answers2024-05-04

Find a master in the nearest place to repair it – go to a kitchen and bathroom dealership or a shop that sells plumbing and ask them to help you find someone.

1 answers2024-05-04

This is a crack in the water pipe or a problem with the two joints, you can ask a professional maintenance person to deal with your own house, and you can find a property in the building.

3 answers2024-05-04

According to the reason, there is no need to dismantle the toilet, the worst case is to remove the water tank, remove the water tank to replace the internal part of the broken accessories, and the worst case is to replace all the accessories in the water tank, which should not be too expensive, and work for one or two hours.

1 answers2024-05-04

If the mobile phone is flooded, you need to perform the following operations: 1Disassemble the whole machine and prepare it for use with the appropriate screwdriver. >>>More

1 answers2024-05-04

The water inlet hose is leaking because it has been used for a long time, and it is enough to tighten it with a wrench.