-
Anonymous users2024-01-23In most cases, there may be water seepage, so you'd better take a picture and I'll give you an exact answer.
In general, when installing the floor drain, due to the thickness of the cushion layer and the convenience of paving the floor tiles, the outlet of the floor drain and the pipe mouth of the sewage pipe are usually not sealed and connected, but only suspended above the sewage pipe mouth, and the surrounding area between the two is made of cement mortar or concrete. In fact, the nozzle grouting material is more effective than replacing cement mortar or concrete for anchoring, and the nozzle grouting material has the characteristics of good self-flowing, high strength, no shrinkage, and rapid solidification, which can quickly fill the gap and achieve the effect of anchoring the floor drain. Next, apply waterproof paint around the floor drain to make it waterproof. >>>More
There is no need, this kind of slope is basically more after decoration.
Tempered glass has a self-explosion rate of three thousandths, which is allowed by the national standard, and it can only be said that it is a coincidence.
Either it is something black that has been wiped or a black stain formed by mold that has been created by a humid environment. >>>More
A broken piece of tile in the bathroom can be repaired:
The bad tiles will be knocked off with a kicking drill, and then the original mortar will be kicked clean. Then find a tile of the same size and the same color (the tile can be seen in the building materials store), and paste it with mortar. If a small amount of mortar is not easy to find, you can also paste it with glass glue and press it flat. >>>More