-
Anonymous users2024-01-23Splash some water on it.
Hot water is best.
-
Anonymous users2024-01-22The paint film is made with Shina water, which means that the pine perfume will fall off when it is brushed, and it will be sold in hardware stores.
-
Anonymous users2024-01-21If the transfer paper used for the façade is colored, you force it to fade, and treat it with hot water.
The large pieces are first torn by hand, and the small pieces or the glue on the opposite side of the film are softened with wind oil essence on it, and then used fine flour or dry powder to wipe with a rag and pasted flour, and pay attention not to scratch the door with a little force.
You can find a place that is already a little up, and apply some wind oil essence (or other oily liquid objects) to the place where it is connected to the door, peel it a little more, and then peel it again, and so on several times, and then it will get better and better to peel, be patient! >>>More
If it is not good to tear, you can use a hair dryer to heat the side of the file to blow and tear!
First find a corner of the edge of the protective film from the top of the door, and then carefully lift the corner of the protective film little by little, and then pull down little by little in the form of a diagonal according to the shape of the door, the force can not be too large, to ensure that the protective film will not be torn, the force should be even, if you accidentally tear it, find another corner, tear it in this way, and know that the surface of the door is smooth.
Is it that the plastic packaging on top of the paint can't be torn off? If yes, try WD 40, or an asphalt cleaner for cars, the former can penetrate into the crevices and make it easy to peel off, and the latter can be sprayed for a while to soften the plastic film without damaging the paint, and it can be wiped away.