Ask for advice How high is the solid wood baseboard?

Updated on Solid wood 2024-05-22
4 answers
  1. Anonymous users2024-01-24

    You can choose a centimeter baseboard, and you can use a centimeter under the cabinet.

  2. Anonymous users2024-01-23

    The specifications you give don't seem to be general specifications, most of the general angles are 2000*75*15 A few with a height of 88 (mm units) suggest you consider a lower one, because this is basically the same as the width of your door line, and then there is a cabinet under the best with a little finger corner buckle, that is more beautiful.

  3. Anonymous users2024-01-22

    Now the floor height of the house is about 3 meters, it is recommended to use, if the home is a duplex or villa, it looks good, atmospheric!

    Add a footline under the cabinet, I personally don't think it's very good-looking, if you want to add, just add 7 cm plus too wide and bulky!

  4. Anonymous users2024-01-21

    9 cm Generally, the height of the baseboard is about 100mm.

Related questions
4 answers2024-05-22

Solid wood baseboard is a decorative material made of wood materials and the contact between the wall and the ground, which has two forms: solid wood log production and man-made board (such as multi-layer board and decorative panel). >>>More

6 answers2024-05-22

The inner angle is 44 degrees, the outer angle is 46, and the general wall is not 90 degrees. Cut the footboard vertically, cut one side at both ends of the inner corner, draw a little longer on the measuring tape, and leave the line. If there are inner and outer angles, cut the inner and outer angles.

1 answers2024-05-22

The standard large core board is pressed by solid wood, the joint connection of the middle wood is very tight, and the cutting surface is smooth and flat, while the internal material of the fake and inferior large core board is very rough, and the middle is a gap, which is easy to warp and deform, and if the unqualified glue is used in the board, it will bring the harm of formaldehyde. Cut off a corner at the time of purchase for identification.

2 answers2024-05-22

No need to tear it off, it's moisture-proof. Tear it off more easily damp deformation.

2 answers2024-05-22

Hitting the nail with a nail gun will be a little more secure. Then the joint with the wall is smeared with glass glue and glued. (It is recommended to choose neutral glass glue for glass glue, and acid glass glue has a big taste).