-
Anonymous users2024-01-23There are generally 4 expressions for bathroom sinking:
It is written in the general description of the drawings that the bathroom and kitchen and other rooms with water sink 30mm or 50mm, and the bathroom sinks on the page of the architectural drawing.
Write in the plate reinforcement diagram or.
The color of the plate is separately distinguished from the other plates and indicates its sinking.
-
Anonymous users2024-01-22Generally, the bathroom sinking drawings are not marked with elevation separately, and will be described in the general description of the building, the general description of the structure or the description of the plate structure drawings.
-
Anonymous users2024-01-21In the construction drawing, you can see if there is an elevation on the floor plan of the bathroom.
-
Anonymous users2024-01-20The building drawing should give the sinking elevation, you can also look at the unit details or the bathroom in the strong position can see the strong body (I have seen very little) individual places may be different, in the structural drawing of the floor slab reinforcement drawing should have elevation labeling and filling patterns.
-
Anonymous users2024-01-19Looking at the elevation of the drawing, if the elevation is higher than the ground elevation of other spaces outside the bathroom, it means that it is sinking; If it is a conventional sinking of 2cm, there will be instructions in the general description on the drawing, and there is no need to mark it one by one.
-
Anonymous users2024-01-18There is a unified elevation in the building elevation, which is plus or minus zero relative to the ground on the first floor to see if there is a negative elevation in the bathroom part, or the elevation relative to that floor, to see whether it is higher or lower than this elevation.
-
Anonymous users2024-01-17It is generally marked as a means that the part is lowered by 5cm on the ground of the building.
-
Anonymous users2024-01-16The elevation of the plate should be marked in the structure drawing. or noted in the profile. In the architectural drawing, you can only look at the section drawing.
Friend, have you ever seen a huge "restaurant" more than 1 kilometer wide? One thousand and twenty-five meters! For the whole town to eat together! Joke!
The balcony in the architectural drawings is 2380 is 238 centimeters, and when the scale is 1 to 30, it should still be meters. Because the marked 2380 is a meter, it has little to do with the scale.
To meet the conditions of the balcony is calculated according to the terrace, it seems that the owner has earned. It should also be counted according to the balcony. >>>More
I'll come to your questions! 1. CT is the cushion cap, which is the abbreviation of the Chinese pinyin of the cushion cap, many of which are like this in architecture, such as frame column KZ, frame beam KL, etc., remember that it is the abbreviation of Chinese pinyin, not English, CT should be pronounced as cushion cap; 2, Figure 1 interpretation as: cushion cap 1 (to distinguish Figure 2 to its self-number) plane centroid, center of gravity and axis coincide, B direction ruler.
That is, there is a circle of trabeculars along the ceiling of the bathroom wall, and there is no wall from the ground upwards;