Can you use a red brick partition wall in a sunken bathroom?

Updated on Bathroom 2024-05-08
1 answers
  1. Anonymous users2024-01-23

    【Product application scope】

    It is suitable for waterproof and moisture-proof toilets, kitchens, balconies, floors, pools, and basements.

    Product construction technology].

    1. Base treatment: The surface of the base should be smooth, solid, clean, no sharp corners, no oil stains, no water and cracks.

    2. Preparation of slurry: first pour the liquid material into the mixing barrel, slowly add the powder while stirring, and stir it with an electric mixer until it is uniform and free of agglomeration. When stirring, water can be added appropriately as required to adjust the viscosity of the brushing, and the preparation ratio is shown in the certificate.

    3. Detail treatment: according to the design requirements, the sealing material is embedded in the groove; The yin and yang angles and pipe root parts should be pre-treated into arcs or obtuse angles before construction, and the mesh cloth should be laid and appropriately multi-coated.

    4. Large-scale construction: first wet and saturate the base but there is no open water, the waterproof coating film should be painted two to three times, and the next process can be carried out only after each coating film is dried, with an interval of 4-6 hours. After the coating film is completely dry (72 hours is expected), the closed water test can be performed.

    Water Lipton high elastic waterproof coating.

    Water Lipton high-elastic waterproof coating is a thick one-component waterborne polymer waterproof coating material made of high-quality modified acrylate polycopolymer polymer emulsion as the base material, adding a variety of additives and fillers. The coating film has the characteristics of low temperature resistance and high elongation.

    【Product application scope】

    It is suitable for waterproof and moisture-proof toilets, kitchens, floors, balconies, and non-exposed roofs.

    Product construction technology].

    1. Base treatment: The surface of the base should be smooth, solid, clean, no sharp corners, no oil stains, no water and cracks.

Related questions
2 answers2024-05-08

If the foundation is sinking, it is more serious.

You're just plugged up, and then it's going to crack after a long time, it's because of your foundation, or because the foundation isn't laid. >>>More

9 answers2024-05-08

OK. Aerated concrete block is a new type of building material with thermal insulation, light and porous, with certain seismic capacity, nailing, sawing, planing and good fire performance. It is recommended to use gray sand bricks for less than 1 meter, and aerated concrete blocks for the above. >>>More

3 answers2024-05-08

The kitchen and bathroom are not suitable for fish tanks. >>>More

1 answers2024-05-08

The bathrooms of modern commercial houses are all sunken caisson toilets,which are convenient for toilets

1 answers2024-05-08

You should ask a professional renovation construction master, who can tell you the sunken bathroom, with wooden planks as the bottom and cement steel bars on top, can this question be?