There are several ways to suspend a gypsum ceiling

Updated on Suspended ceilings 2024-05-17
1 answers
  1. Anonymous users2024-01-24

    Normal two methods:

    One is to use wood ceiling, because the wood is easy to deform and the flame retardant performance is not suitable for tooling.

    The other is the light steel keel ceiling, which can meet the needs of minimizing deformation and flame retardant performance, and has a wide range of use.

Related questions
7 answers2024-05-17

Four kinds of 1Movable ceilings.

2.Concealed ceilings. >>>More

1 answers2024-05-17

House decoration, with gypsum board ceiling, sometimes there is a yellowing problem, often not properly solved, resulting in rework, increase the cost of decoration. >>>More

1 answers2024-05-17

Type 1: Flat ceiling.

Flat living room ceiling, simply put, refers to the surface of the ceiling does not carry out any shape and level of design, the top structure is smooth and concise, generous and neat, the use of materials, compared with other ceiling forms are also more economical, suitable for all kinds of ceiling decoration. Generally speaking, flat ceilings are often spliced with various types of decorative panels, and some of the surfaces are brushed, sprayed, and pasted with wall cloth. >>>More

3 answers2024-05-17

The spacing of the main keel is usually 900 1200, the secondary keel covered keel is 400 * 400, or 400 * 600, the side keel is the perimeter of the wall, the grille lamp and the maintenance port and the air conditioning Wang tuyere will have the keel strengthened, the ordinary decoration gypsum board with a single layer, the fine decoration gypsum board low with a double layer, the early high level with a single layer of 12 thick Lu Lingqin, there is a modeling ceiling, the amount of gypsum board is calculated plus loss.

3 answers2024-05-17

The elastic line is copied out of the horizontal point on each wall (column) corner in the room with a level meter (if the wall is longer, a few points should be copied in the middle), and the horizontal line is popped up (the horizontal line is generally 500 from the ground), from the horizontal line to the design height of the ceiling, the horizontal line is popped up along the wall (column) with the pink line, which is the lower skin line of the ceiling grille. At the same time, according to the ceiling plan, the position of the main keel is ejected on the concrete roof. The main keel should be divided from the center of the ceiling to both sides, the maximum spacing is 1000, and mark the fixed point of the boom, the fixed point spacing of the boom 900 1000. >>>More