How to quickly remove the smell of formaldehyde in the room from the furniture you just bought

There are still many ways to remove formaldehyde from furniture, but remember not to choose blindly, formaldehyde is not only harmful but also difficult to remove, so don't be careless, even if it is just a wardrobe of formaldehyde, it will also affect people's health, so which methods can effectively remove formaldehyde? Here's the answer.

1. Wise Stone.

It has regular honeycomb voids inside, its specific area is huge, can efficiently adsorb formaldehyde, its adsorption capacity is strong, can reach more than 20 times of the traditional activated carbon, not only the adsorption capacity is large, but also has the function of ion exchange, can decompose formaldehyde and other harmful substances into harmless carbon dioxide and water, without replacement can be used for a long time. When choosing, it is important to note that it is a gray ore with an irregular shape and is not a round particle

2. Open windows for ventilation.

Open window ventilation is a very simple method to remove aldehyde, the purification principle is indoor and outdoor air circulation replacement, can release free formaldehyde and other harmful gases in the indoor air to the outdoors, reduce the indoor formaldehyde concentration. The efficiency of its aldehyde removal is directly related to the size of the outdoor wind, and the greater the outdoor wind, the higher the purification efficiency.

3. Activated charcoal.

Activated carbon has a large number of irregular pores, in which the pores similar to formaldehyde molecules will adsorb formaldehyde, which can achieve the purpose of purifying the air, but the number of internal pores is limited, when the adsorption is saturated, it may cause secondary pollution, and it must be replaced regularly when used.

Fourth, high temperature.

We all know that formaldehyde is volatile at high temperature, and we can use some heating equipment to increase the temperature at home a lot, so that a large amount of formaldehyde gas can be volatilized, and then formaldehyde can be removed by opening windows for ventilation. Repeated operation a few times, you can remove most of the formaldehyde in the home, but we must pay attention to safety when using heating equipment to avoid fire.

5. Photocatalysts.

The main principle of photocatalyst is that the spray will adhere to the surface of the object to form a strong film, on the one hand, it will slow down the release of formaldehyde, on the other hand, it will contact with the film during the release process, and oxidize formaldehyde by using the photocatalytic performance of the photocatalyst. However, in daily life, the film may oxidize and wear, and the effect will be halved.

In order to better reduce the formaldehyde concentration in the home environment, in the process of decorating the new house, try to control the quality of decoration materials and choose materials with relatively low formaldehyde content.

Opening windows for ventilation is a must, and natural emission is the best.

A simple piece of furniture may not exceed the standard, and all the furniture is stacked in the room before it can exceed the standard. It is recommended that you do a formaldehyde test indoors to see if it exceeds the standard. If it really exceeds the standard, it depends on what the value is, and then choose a more suitable way.

If there is not much excess, it is okay to keep the window open for ventilation, because the window ventilation can only disperse the formaldehyde released, which is a symptom but not a cure, so it is only suitable for the use of the family with a small number of super. If it is too much, it is recommended to find a formaldehyde treatment company, and the management company will remove the formaldehyde from the source, so that the families with more than the standard can move into the new house as soon as possible.

The new home has a taste, and it only takes three steps to say goodbye to formaldehyde pollution after moving home

The furniture odor mainly comes from the wood paint inside and on the surface of the board, they are released slowly and the release cycle is relatively long, so there has always been a problem in removing the furniture odor, that is, it can only remove the surface pollution that is released, and can not remove the internal pollution deeply, which will lead to the purification treatment, the smell may come out again after a period of time, so in view of this situation, the common treatment methods of environmental protection engineers are sorted out, and it is recommended that you can deal with it from the following three steps, Whether it is surface pollution or internal pollution, it can achieve a good purification effect.

Step 1: Open the windows and ventilate the furniture

Ventilation is the simplest and most effective way to reduce indoor pollution, except for the weather reasons that can not open the window, we should cooperate with the window ventilation in an appropriate amount, and all the furniture doors should be opened at the same time as ventilation, which helps to accelerate the odor in the furniture, and has a good help to remove the furniture odor that has been released.

Step 2: Spraying decomposition medium penetrates and decomposes

The pollution inside the furniture plate is the most difficult to remove, but this is not difficult for environmental protection engineers, they usually use natural decomposition media to spray the inside and outside of the furniture, the natural decomposition medium itself is safe and non-toxic, and will not cause any harm to the human body and furniture, and it has the effect of osmotic induced decomposition, which can penetrate into the interior of the furniture plate to decompose, that is, it can be treated from the source, so it can play a very good purification and deodorization effect.

Step 3: Long-term adsorption and decomposition of algae

The release cycle of formaldehyde and other pollution is as long as 3-15 years, in order to achieve better and faster results, and at the same time avoid the rebound of formaldehyde that may occur in the later stage, properly place some algae sodium packets in the furniture, which can play a role in continuously adsorbing and decomposing the harmful gases released by the furniture, and the algae can decompose formaldehyde, so there is no need to worry about adsorption saturation, and it does not need to be dried in the furniture, and it is more convenient to use.