-
Anonymous users2024-01-24This should not be removed, isn't it just right to put the toilet mouth in the mouth of the sewer pipe, so that you don't have to stop it.
-
Anonymous users2024-01-23Tools: 1. Angle grinder or professional tube cutter is preferred (only available if you are looking for a professional service company or worker).
2. It is okay to cut with small steel tools by yourself, if the requirements are not high.
Note, don't cut it, this is a fixed project, once damaged, you need professionals to repair it.
-
Anonymous users2024-01-22Cut flat with a cutter by hand or with a hacksaw blade.
About 2 cm, put on the rubber pad, sit on the pier and sit on the toilet can not shake - if it is high, you can cut it when it is installed.
1. Toilet shifter.
The toilet shifter is mainly aimed at adjusting the position of the toilet bowl in a small way, which is generally caused by the inappropriate distance of the toilet pit; However, the distance between the pits should not be too large, only within 10cm, and it will not work if there are more. >>>More
It is not good to use that kind of mesh mat, it is easy to accumulate water, and it is necessary to lift it up often to clean, and after a long time, it will also leave stains on the floor of the bathroom, so it is not recommended to use it, and the best way is to put a pair of clean slippers at the door of the bathroom as a replacement.
Generally, it should be about 2 cm above the ground, and the exposed part should be nested and pressed with the outlet of the toilet bowl to ensure that the sewage does not leak out.
Why is it so high?
3 cm is a bit tall. >>>More