Can hydrochloric acid flush a clogged toilet?

OK.

Regarding the method of using salt and baking soda when the toilet is blocked, first prepare about a cup of baking soda, an appropriate amount of hydrochloric acid, and an appropriate amount of hot boiled water. Pour the prepared baking soda into the clogged toilet, try to pour it low in the middle, and do not pour it on the toilet wall, to prevent the amount from not enough, it is difficult to react, and the effect cannot be achieved.

After pouring in the baking soda, pour the prepared hydrochloric acid into it as well, and be careful when pouring. The function of hydrochloric acid is to react with baking soda to produce a large amount of carbon dioxide gas, which increases the air pressure in the toilet. Another function is that hydrochloric acid is an acidic substance, which can react with some adherent pastes on the toilet wall, so that the blockage loses some adhesion, which is easier to be flushed away.

Precautions for toilet use.

The toilet bowl is easy to be stained with urine stains, feces and other dirt, if you find that there are still residues after flushing, you must use a toilet brush to clean it in time, otherwise it is easy to form macular stains, and mold and bacteria will also breed.

In addition to the vicinity of the pipe mouth, the inner edge of the toilet outlet and the outside of the base are places where dirt and dirt are hidden, when cleaning, first lift the toilet seat, and spray the inside with toilet cleaner, after a few minutes, use a toilet brush to scrub it thoroughly, it is best to use a brush with a thin head, so that the inner edge of the toilet bowl and the depth of the pipe mouth can be better cleaned. Then brush the base and other crevices.

There is no such thing as a good time to unclog the toilet, yet the toilet always seems to be clogged at the most inopportune time. In fact, you don't need to spend money on a plumber to unclog the toilet yourself. Just follow the steps here, and you'll be able to solve the problem before someone comes to your home.

Method 1: Prepare before you start using the toilet.

1. Flush only once. If you've already flushed once, don't pump again. This will cause more water to pour into the toilet basin. If the toilet is clogged, the first flush will not cause the toilet basin to overflow, but the second flush might.

2. Wear a pair of rubber gloves. The toilet is not meant to be a hygienic place, but a good pair of rubber cleaning gloves will protect you from any germs in the toilet.

If you can see something blocking the toilet, remove it with gloves on (if you can).

3. Protect the floor. Worse than a clogged toilet is a leaking toilet. Line the floor with newspaper or paper towels to absorb as much water as possible to reduce potential damage.

In addition, when you use the toilet, it may cause a small splash or spill, and these newspapers or paper towels can make it easier for you to clean up later.

4. Make sure that the water supply system of the toilet is turned off, usually behind the toilet bowl and looks like a normal faucet. Never turn off the water supply in an entire house to prevent others from being deprived of water. Only turning off the water supply system of the toilet prevents toilet "flooding".

5. Make sure the toilet is well ventilated. Open your ventilation or windows to minimise foul odors and avoid inhaling too many potentially toxic gases from any chemical products you may be using.

The main ingredient in the toilet cleaner is hydrochloric acid, hydrochloric acid can play a role in decomposing debris due to the acidic effect, hydrochloric acid can remove the dirt in the toilet, and the main ingredient of the toilet cleaner is acidic components, relying on acid to achieve the decontamination effect, because the main components of toilet debris are calcium carbonate and magnesium hydroxide, which will react with hydrochloric acid to form a substance dissolved in water, so that the effect of dredging the toilet is simple and convenient, and it will not damage the toilet.

From the web.

Hydrochloric acid can be used to unclog toilets or pipes. However, because the sewer pipe is not resistant to acid and alkali, the sewer pipe will break after a long time.

How to unclog the toilet:

1. Shove a few times with a pickpocket, and there is one sold in the supermarket"Pipe pass"It works, use it once every half a month, and it won't be blocked.

2. Try to use a relatively long, not hard but not very soft, soft snorkel inserted into it, flush with water while passing in, and the water should not be too strong to avoid splashing until it is flushed, and then flushed.

3. If it is because of the blockage of easily decomposed objects such as paper scraps, you can pour boiling water first to soften the blockage in the sewer pipe, but don't be too anxious, soak for a while, and wait for the blockage to soften and disperse, see the sewage slowly drained away, and then use a large bucket of water to flush it may be clear.

Hello, hydrochloric acid should not be, toilet blockage should be hard object blockage, and hydrochloric acid cannot solve the problem.

Summary. Hydrochloric acid can be used to unclog toilets.

Hydrochloric acid can be used to unclog toilets.

It's a long process.

First of all, prepare a cup or so of baking soda, an appropriate amount of hydrochloric acid, and an appropriate amount of hot boiled water. Pour the prepared baking soda into the clogged toilet, and try to pour it in the middle of the lower place, not on the wall of the toilet bowl, to prevent the amount is not enough, it is difficult to react, and the effect cannot be achieved.

After pouring in the baking soda, pour the prepared hydrochloric acid into it as well, and be careful when pouring. The function of hydrochloric acid is to react with baking soda to produce a large amount of carbon dioxide gas, which increases the air pressure in the toilet. Another function is that hydrochloric acid is an acidic substance, which can react with some paste on the toilet wall, which makes the blockage lose part of the adhesion, which is easier to be flushed away.

Slow. Hydrochloric acid is an aqueous solution of hydrogen chloride (HCl) [2], which is a monobasic inorganic strong acid with a wide range of industrial uses. The properties of hydrochloric acid are colorless translucent and clear liquid, with a strong pungent smell of closed thoughts, and high corrosiveness.

Hydrochloric acid can help break away some substances from clogging. But the effect is mediocre.