How to prevent moisture from the wooden floor in the room next to the bathroom?

1. Maintain appropriate humidity.

Once the parquet is installed, it is best to move in within two weeks. For rooms that are not occupied for a long time or are infrequently occupied, several basins of water should be placed in the room and the amount of water should be maintained, or a humidifier should be used to compensate for the evaporation of water due to the opening of the indoor heating or opening the window for ventilation.

The indoor environment should not be too dry or too humid to prevent the wood floor from drying out, shrinking or expanding and deforming. Secondly, care should also be taken to keep the planks dry and clean, and wipe the floor with a wrung out soft wet towel.

2. Waxing. In order to maintain the beauty of the solid wood planks and prolong the life of the lacquer surface, wax every two months, wipe the stain clean before waxing, then evenly apply a layer of floor wax on the surface, and wipe with a soft cloth after a little drying until smooth and shiny.

3. Wipe with laundry detergent.

If there are oil stains, you can wipe them with a rag or mop dipped in warm water and a small amount of washing powder, or you can use neutral soapy water and a little detergent to scrub. If the stain is severe and this method is ineffective, you can gently wipe it with high-quality sandpaper or steel wool balls.

In the case of drug, beverage or pigment stains, they must be removed before they have penetrated the wood surface by wiping them with a soft cloth soaked in furniture wax. If it still does not work, use a steel wool ball dipped in furniture wax to wipe it.

4. Please dry naturally after soaking in water.

If a large area of water is accidentally flooded or partially soaked in water for a long time, first absorb the visible "open water" with a dry cloth in time, and then let the solid wood floor dry naturally, and do not use electric heat drying or sun exposure. When moving furniture, it should not be pushed or pulled directly on the floor, but should be lifted and moved and placed gently. Furniture that is constantly moved can be padded with an eraser on the bottom.

5. Keep dampness away from the floor.

The humidity in the room should not be too high, as this will make the floor warp due to moisture, which will not only affect the appearance, but also shorten the service life. Do not wipe the floor with a damp rag. During rainy or wet seasons, try to ventilate the room and don't pile too many items on the floor.

Keep the floor dry and clean, and wipe it with a wrung out cotton mop for daily cleaning. In case of stubborn stains, wipe with a neutral cleaning solvent and then wipe with a wrung out cotton mop, and never use acid, alkaline solution or organic solvents such as gasoline to scrub.

First, the choice of substrate.

The area of the bathroom is usually not large, and it is really difficult to separate the dry and wet in an area of a few square meters, so we have to hope for the basic materials with moisture-proof engineering. Therefore, it is recommended that the bathroom cabinet selected should have better moisture-proof performance in terms of material and technology. If a good quality product is fully ventilated, there is no problem if the humidity reaches 95% in a short period of time, because it will dry out in a short time.

Second, panel selection.

The first barrier between bathroom furniture and the humid air in the room is the furniture panel, so the advantages and disadvantages of the panel are also a problem that we need to consider. In the face of a dazzling array of panels on the market, owners must not have any choice when purchasing, and they must choose the panel that suits them. High-quality solid wood veneer and wood grain with plastic resin protection are easier to maintain and have a classic aesthetic in terms of decorative effect.

3. Internal moisture-proof.

A common phenomenon in the bathroom is that the low floor of the sink cabinet will be deformed after the bathroom furniture has been used for a period of time, because the water pipes hidden in the cabinet are not taken seriously. Because the pipe was relatively hidden, it was installed without consideration for stability, so the low waterside of the cabinet remained and soaked the furniture, creating an irretrievable situation over time. Therefore, it is necessary to use a waterproof aluminum bottom plate with a waterproof bumper strip, and this will not be the case.

Fourth, pay attention to the installation process.

Be sure to pay attention to the sanitary ware in the bathroom. While choosing bathroom furniture is important, it is only the first step, and the installation process is equally important, and if you don't do it well, it will be useless. You must know that water droplets and water vapor are pervasive, and it is best to do a good job of waterproof and moisture-proof, and you must do a good job in the installation of bathroom furniture.

Be clear about the function of the moisture-proof mat for wood flooring. The main function of the wood floor moisture-proof mat is moisture-proof and warm-proof, because the moisture-proof mat is waterproof, it can play the role of moisture insulation. The moisture-proof mat of wood floor is the partition between the floor and the ground, which is laid close to the ground, and mainly plays the role of moisture-proof, protecting the floor, increasing elasticity and ground leveling.

After sprinkling insect powder on the dry ground, lay a thick moisture-proof film, because the moisture-proof film is generally about 5-10mm thick, which can effectively prevent the penetration of underground moisture, and at the same time, it is necessary to take into account the position of the wall foot, and must not affect the finishing because of the locality. If you want to prevent moisture more thoroughly, spread a layer of activated carbon, don't underestimate activated carbon, it can have the effect of moisture absorption and insect prevention.

The bathroom waterproofing is not done well, let's get the bathroom down again, otherwise it will be difficult to solve the problem, and the situation will worsen.

First of all, to protect your hardwood floor, your bathroom should be waterproof. This is the source, the bathroom waterproofing is done, so that there will not be more water and moisture seeping into the solid wood floor.

Secondly, do a moisture-proof treatment under the solid wood floor, and brush it with cement-based waterproof slurry to achieve the moisture-proof effect. For example, Leibangshi universal waterproofing paste.

There is no problem with the wall of the room, it does not mean that there is no problem with the floor, it may be that the waterproofing of the corner of the bathroom is not done, and there is water seepage.

For the time being, you can put some lime powder and put it in a bag, but keep it open...

Personally, it is better not to have wooden floors in the room next to the bathroom! If the landlord wants to lay a wooden floor, first of all, the waterproof layer of the bathroom wall and ground should be done; Secondly, the room next to the bathroom also has a moisture-proof layer on the wall and floor! It's all work that has to be done.

Pay more attention to the water in the bathroom, especially the moisture-proof wall, and be sure to do it in place! Finally, if the landlord still has anything to worry about, you can refer to the content of the first time network decoration school! There is a lot of knowledge in this area, and the landlord can make a reference!

For the time being, you can put some desiccant.

You can also turn on the air conditioner to dehumidify.

Moisture-proof three-plate axe.

Intermittent ventilation: The best time to do this is to close south- or southeast-facing windows and doors on rainy days to reduce moisture entering the room. At noon, the air humidity outside is at the highest value, and it is not appropriate to open the window, so it should be opened in the afternoon or evening, when the climate is relatively dry, open the window to adjust the indoor air.

Lime moisture absorption: On rainy days, quicklime can be wrapped in cloth or sacks and placed in various places indoors to keep the indoor air dry.

Air conditioner dehumidification: It is simpler than the previous two methods, but now that it is in the season of power shortage, it is recommended to use other environmentally friendly moisture-proof methods to save energy.