-
1.In the case that the water pressure is not lower than that, after a period of use, if the water output is found to be reduced, or even the phenomenon of the water heater going out, you can gently unscrew the screen cover at the water outlet of the faucet to remove impurities, and it can generally be restored as before.
2.Experienced and qualified professionals should be invited to carry out construction and installation. When installing, the faucet should try not to bump with hard objects, and do not leave cement, glue, etc. on the surface so as not to damage the surface plating luster. Pay attention to remove the debris in the pipe and install the faucet.
-
Go to the neighbor's house to see if the water has stopped. If the water is not stopped, it is time to change the faucet.
-
If the faucet is not broken, it is recommended to find a professional to come and see what the problem is.
The main problem is at the bend at both ends of the water pipe, which can be focused on dredging. The straight part of the pipe is not too much of a problem.
The kitchen faucet has a small amount of water, so what to do with a brush. >>>More
1. Water leakage at the water outlet: The kitchen faucet leaks, and the water leakage at the water outlet is caused by the wear of the shaft gasket in the faucet. Solution to a leak at the outlet: >>>More
Check the direction of the water along the pipeline.
First look at whether the main valve is closed, and then see if the faucet in other places such as the bathroom is coming out of the water; Then check whether the valve of the kitchen faucet is closed, try to rotate it, and turn on the faucet to confirm whether the water comes out; >>>More
It's not that the sink is stuck under or the rubber pad hasn't been removed down