The toilet tank is slow to drain, and it is difficult to flush down the excrement

Updated on Toilet 2024-05-23
7 answers
  1. Anonymous users2024-01-24

    If you flush with external water, you say that the water is slow, how about the tap water elsewhere, if it is normal, it is the problem of the toilet water, is the equipment too old, the place is blocked, press it, and move each part to get through. Generally, the new replacement is very simple, draw a scoop according to the gourd, and it is better to tighten it without leakage, or find a friend who understands it.

  2. Anonymous users2024-01-23

    There are two scenarios:

    1.If it is not clogged, the toilet bowl is broken.

    2.It is that the valve for the water supply is too small.

    Method: See if the amount of water in other devices in the home has also decreased.

    If not, change the water pipes.

    If so, install a supercharger.

  3. Anonymous users2024-01-22

    First, maybe the water pressure is too small, you can add a supercharger Second, maybe the water tank is blocked as you said, first find out the reason in the treatment.

  4. Anonymous users2024-01-21

    If the sewer is clogged, just dredge it.

  5. Anonymous users2024-01-20

    Adjust the toilet upper pipe, there is an adjustment knob.

  6. Anonymous users2024-01-19

    The first water tank is full and then flushed, and the second is flushed with basin water.

  7. Anonymous users2024-01-18

    You can adjust it by opening the water tank.

Related questions
The toilet is clogged and depressed, but the excrement has been flushed down, and now the toilet is
7 answers2024-05-23

I just used a trick and it works so well. You try it, take a pair of autumn pants that you don't wear, chemical fiber is the best, tie it with a strong rope, pour the toilet full of water, and press the autumn pants down with a stick. Don't be too fierce for fear that you won't be able to fish out your pants, and the water will be cleared when the water is gone. >>>More

Will the excrement in the toilet still flow back into the water pipe if it is flushed?
2 answers2024-05-23

No, that's two pipes. One is that the water pipes should be sewer pipes, how can they be mixed together, it is better to turn around and have a big problem.

Does the toilet flush have anything to do with the weight of the excrement?
1 answers2024-05-23

It doesn't matter, it has to do with the size of the water tank and the direction of the water in the design of the horse. 、、Forget to adopt.

I flushed the toilet and flushed the excrement, and the water backflow was a little dirty, and there
2 answers2024-05-23

The water is not smooth and there is a blockage.

The toilet tank is slow to fill the water, what is the reason
4 answers2024-05-23

There is less water coming out of the faucet.

The first trick, most of the toilet water problems are related to the faucet, the toilet faucet water output is less will naturally lead to slow water supply, there is a filter screen in the toilet water replenisher, after a long time of use, the filter will accumulate a lot of dirt, so that the water flow will be affected, you can take it down directly for cleaning. First of all, disassemble the water inlet pipe, see if the filter screen of the water inlet component of the water tank is blocked by impurities, if it is blocked, it is simple, take it out and clean it. If not, there is a valve in the tank to check the water, and the water in the tank can be quickly drained by re-spraying. >>>More