-
Anonymous users2024-01-23There is no hot water in the bathroom shower head. And the water is small because the shower head is clogged with limescale.
The shower head outlet hole is small and can easily clog. You can put the shower head in a plastic bag, pour in white vinegar, and put some water to tie the plastic bag tightly. After an hour, the limescale from the outlet hole of the shower head has melted. You can get out of the water normally.
Because the scale of the shower head is alkaline, it can be dissolved by neutralizing it with vinegar.
For example, the picture below shows a fixed shower head being cleaned in this way.
-
Anonymous users2024-01-22The tee is partially blocked, just remove it and clear it!
Gas water heaters are not easy to use, and the water flow rate should be considered first. >>>More
Hello, the advice for you is 1Turn on the faucet switch on the top of the basin and rotate it to the direction of hot water; 2.In the case that the orange line of the water supply pipe is normal and the electric water heater is working normally, if there is no water flowing out of the faucet, the water inlet switch belonging to the electric water heater is not opened, and the water inlet switch can be turned on. >>>More
It may be that the faucet is blocked, check whether the adjuster is turned on to the maximum, and if it is normal, it should be disassembled.
Is it that the hot water pipe is not connected properly, or that the hot water is still boiling when it runs out!
I think there are two main possibilities, one is that the water heater is broken, and the other is that the pipe is clogged.