-
Anonymous users2024-01-23Kiss is happy to answer for you: Will a bottle cap in the bathroom sink clog the drain? A:
Kiss will be stuffed. Slight blockage of the toilet: It is usually caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or a simple dredging tool.
Toilet hard object blockage: Loose stare so that plastic brushes, bottle caps, soap, combs and other hard objects accidentally fall into use. If the blockage is slight, you can directly use a pipe dredging machine or a simple dredging device to dredge it directly, and when it is serious, you should disassemble the toilet to dredge it, and this situation can only be completely solved by getting things out.
Toilet aging and blockage: the toilet has been used for a long time, it will naturally scale on the inner wall, and in serious cases, it will block the air outlet hole of the toilet and cause the toilet to drain slowly.
-
Anonymous users2024-01-22The bathroom wash basin has a bottle cap, will it block the sewer, the key is to see the size of the bottle cap, the general washbasin sewer pipe is a DN32 pipe, under normal circumstances, the bottle cap with a diameter of 20mm or less can be washed away with the water flow, the bottle cap is big to block, and the inner wall of the pipe will have some impurities to adhesion. If the bottle cap is not flushed down, you can remove the washbasin drain pipe and take it out, which is not complicated.
-
Anonymous users2024-01-21Basically, it won't clog because the cap is much thinner than the tube.
1. Bathroom wash basin size.
Bathroom basin size. >>>More
You can use a professional cleaner, such as Perfect, Amway's multi-purpose cleaner. >>>More
<> The minimum installation size and width of the toilet wash basin should be about 550mm. Many homes have small sizes, and in order to save space, the width of the sink will be reduced, but even if the width is reduced, it cannot be smaller than 300mm. In addition, a space of 1100mm should be reserved on both sides of the wash basin, i.e. 550mm. >>>More
Regarding how high the washbasin in the bathroom should be from the ground, I personally think that when making a washbasin, in order to prevent the washbasin from splashing on the wall next to it when it is in use. Therefore, it is necessary to do a good job of waterproofing the wall before installing a washbasin. Generally, the distance between the bathroom and the ground should be 80 or 85 cm.
There is no specific rule for this, and it should be decided according to the size of the bathroom and the number of users. >>>More