-
Anonymous users2024-01-24Here's a quick breakdown:
1.The outdoor leak is exactly at the height of the floor tiles in your home, so it can be ruled out that it is not a cracked hot and cold water pipe.
2.It will not be a problem with the floor drain, even if there is a problem with the floor drain, the water will leak on the waterproof layer, and the water on the waterproof layer will slowly seep into the sewer.
2.The floor tiles are leaky, otherwise, after taking a shower and mopping the floor, it won't be dry. After the water seeps down from the floor tiles, it flows slowly between the waterproofing layer and the floor tiles.
The waterproofing layer should be painted all over the floor, and the walls that come into contact with the ground should be painted with a waterproof layer at least 20 cm high. And there should be no trachoma in the place where the wall touches the ground, and if there is trachoma, it is like a balloon filled with water, poke a hole, and all the water will flow out of the hole.
So, there are 2 possibilities!
1.The waterproofing at the corner of the wall where the two standing walls meet is not done well, and there is trachoma.
2.Although the ground waterproofing is done, the height of the waterproof brush in the corner of the wall is not enough, when the floor tiles are paved, the mortar is too thick, so that the height of the floor tiles is higher than the height of the wall waterproof layer, then the water will be full of the waterproof layer and seep outward! And you also find that the mortar layer under the floor tiles is wet!
3.It has a certain relationship with the proportion of mortar used in paving floor tiles at that time! The master must have used the dry paving method at that time! The proportion of cement is too small, which causes the water to flow too fast in the mortar layer, and it has already flowed away before it has penetrated into the underground pipes!
-
Anonymous users2024-01-23Such problems are often encountered; That is, it is not a floor tile and it is not waterproof; leaking solar water pipes; The raw material belt of the faucet is not well wound and leaks; You first turn off the solar water test; Turn off the tap water again; The proportion of solar water leakage is large.
-
Anonymous users2024-01-22IT DEPENDS ON HOW YOUR WATERPROOF IS DONE, AND WHETHER THERE IS A RETURN HEIGHT OF MORE THAN 300MM. THE SHOWER SURFACE SHOULD BE 1800MM.
If there is a problem with the floor drain, the downstairs will be depressed.
-
Anonymous users2024-01-211.Floor drain leaking? 2.Wall tiles and floor tiles are water seeping, but the waterproof is not up to the mark? 3.Leaking hot and cold water pipes?
1. How to deal with water seepage on the bathroom wall? >>>More
I think you can find a slope layer and make a non-obvious slope along the direction of the floor drain, so that the usual water is easier to drain. >>>More
The cause of water seepage in the bathroom is a problem with the source of water, which is from mains, heating pipes, and sewer pipes. To determine the cause of water seepage, we must first determine the location, whether there is a water pipe at the location of water seepage, and what is the pipeline? Then close the valve to stop using water or supplying water, respectively. >>>More
The waterproofing of the bathroom is not done.
After the waterproofing of the bathroom is done, its waterproof effect is like a shallow plate, and the water on the floor of the bathroom is discharged from the floor drain to the outside in this shallow plate. Now, your shallow plate is somewhere missing, and the water is leaking outside. >>>More
It has to be waterproofed upstairs, just like on a rainy day, we can only wear raincoats, and the best way to avoid raining is not to wear rain. >>>More