What should I pay attention to when spraying primer for solid wood furniture?

Furniture painting should pay attention to the following aspects:

1. The color should be uniform, and there should be no obvious color difference;

2. The spraying should be comprehensive and uniform, and there should be no less spraying, missing spraying, no oil, orange peel, blistering, whitening and other undesirable phenomena;

Furniture Painting Acceptance Criteria:

1. The surface color is correct, uniform, bright and smooth, and there are no teardrops, too thick, penetrating the bottom, blistering, etc.

2. The paint boundary is straight and neat, and the oil is not out of bounds.

3. The wall is not concave and the corners are flat. The interface between the board and the board and the wall should be plastered after the adhesive tape. 4. If the latex paint is seen at a distance of one meter, there should be no sweep marks.

5. The coloring of wooden nails should be accurate and smooth.

6. Try not to paint in wet weather.

In addition, the wooden board surface should be smooth and flat, without planing marks, ballast and burrs, the pattern should be clear, the paint surface color should be uniform and consistent, the gaps should be tight, the joint position should be staggered, the surface should be clean, and the joints should be straight and square. In terms of bonding, the bond should be firm, the surface should be clean, there should be no overflow, and the floor plate should be arranged reasonably and beautifully. The seams are tight, the surface is smooth and flat, the seams are arranged reasonably and beautifully, the upper mouth is straight, and the cutting angle is accurate.

Wood floor hard wax, soft wax, wax sprinkling cloth should be evenly not exposed, smooth and bright, consistent color.

Doing the bottom is to grind the ash three times, spray the primer twice, spray the sticker, spray the medium paint, grind once, do Grace and punch, and finally spray the topcoat.

First of all, polishing is very important, only after the polishing is done, after the primer is applied, and when it is completely dry, it is lightly sanded with fine sandpaper, and then sprayed with topcoat, preferably with clear paint

Try to ensure that the environment is clean and dust-free, the substrate must be treated in place, polished smoothly, the primer should be too clean, a little diluted, sprayed twice, and it is necessary to pay attention to the spraying technique.