Hotel kitchen gas leak alarm, hotel kitchen gas leak alarm can be connected to the fire host

KitchenWhere are the alarms? Natural gas? You have to be careful, don't turn on the lights or anything, and call a professional to deal with it.

The kitchen gas alarm is simply installed on the socket around the gas leak point.

Open the window for ventilation, there may be a leak in the pipe or interface. It's possible that when you turned on the gas to cook, it leaked out in the kitchen and didn't spread it. If you turn the window on for ventilation or the range hood for a while, you won't be alarmed. >>>More

First of all, you should have a sufficient understanding of positive displacement electric water heaters. The volumetric electric water heater is not a kind of electric water heater that can be used with the opening, the electric water heater is still energized for a long time, the temperature control probe of the water heater is in the middle and upper part of the water heater, when it is just heated to the set temperature, only the water temperature of the upper half of the water heater is hot, and the water temperature of the lower half is not hot, and then heated after the upper and lower temperatures are neutralized, so that the whole tube of water can be hot, (this process is automatic, just like the use of refrigerators) The effective volume of the water heater can be fully utilized, so the electric water heater is not ready to use, Instead, it's on 24 hours a day, which of course definitely requires a little more electricity to offset the heat ,...... emitted by the insulationThe original idea of the electric water heater is to heat with low power for a long time, and use it at any time, of course, it can use the local two electricity prices, and it is most economical to use it at night to heat all day, and it is not impossible to heat it in advance, but the comfort of use is much worse, especially in winter, and the effect of saving electricity is not as imagined. >>>More

You pull it out to see if you can unplug it, if you can pull it out, you can directly take the plug, and then buy a new one and put it on. If you can't unplug it, it is built-in to connect the 220V power cord and signal line, if you can wire yourself, turn off the main switch to ensure that there is no power in the case of cutting the power cord and signal line, find the manufacturer to buy a signal line back and connect it yourself, if you don't know how to connect, you can ask the manufacturer's technicians, they understand.