-
Anonymous users2024-01-23I don't know what kind of bath bomb you use, whether it's the kind of four lamps warm and a small light.
Some bath bombs are designed so that when the light is turned on, the small light in the middle will automatically turn off, which is normal. If the light you are referring to is not on the bath bomb but installed in another location, it is possible that the control line of the lamp is connected to the lighting button of the bath bomb switch.
-
Anonymous users2024-01-22This is a problem with the electrician of the renovation installing the switch.
1. The lines of the socket and the light are not on the same line. So there is electricity.
2. As long as it is a problem of installing switches, find a decoration company to explain it, and there are many problems that can be solved.
-
Anonymous users2024-01-21Your bath bomb should be installed in the lighting circuit, the lamp should be an energy-saving lamp with electronic ballast, and the voltage drops when the bath bomb is turned on, causing the fluorescent lamp to go out! Changing to a low-power incandescent lamp can directly solve the problem, or it is better to change the power supply of the bath bomb to the bathroom wiring.
-
Anonymous users2024-01-20The light and socket are not one way and are not controlled by the same air switch. You can check your gatebox to see if there are any drops.
-
Anonymous users2024-01-19There is a kind of bath bomb that can replace the air fan, its design is a middle air fan, the air ventilation fan ventilation duct can always lead to the atmosphere, four corners of four 250W bulbs.
At this time, if you install another ventilation fan in the bathroom, it will be purely superfluous.
This is really fine, you don't have to be so careful, the toilet is already ready when it leaves the factory, and you can press it whenever you want. It's just that if the glue under the new installation is not dry, it is generally used after a day, but even if the glue is not used, the use of the toilet will not be affected.
If it trips, it may be a short circuit, and it must be repaired before pushing the brake, if you force it to push up, it will be dangerous.
There may be two main reasons: 1. The power cord connecting the bath bomb has a small wire diameter and a large power bath bomb; 2. There is a virtual connection between the bath bomb and the power cord connector.
Yes, little bugs will take advantage of the opportunity.
First, the quality of electrical appliances, noise control is not up to standard, second, the installation is not in place, the electrical appliances are not fixed, the motor works to vibrate, and the noise is emitted, it is recommended to install Jinyao bath bomb. Professional installation Believe in the power of the brand.