-
This can only be analyzed according to the structure of the headbox, the lid on the top of the headbox, there is a sealing strip, to see if the sealing strip is damaged, some numerical control transformation, will remove some transmission gears and forks in the headstock box, these shafts may extend out of the headbox, whether the shaft and the hole are well sealed.
In addition, if water gets in, there is a risk that oil will leak out.
It is easier to check the location of the oil leak.
1.Carbon deposits can cause insufficient combustion of gasoline and cause the engine to shake. The impact of engine carbon deposition on the car is quite large, first of all, to reduce the engine power, that is, to make the power output uneven and gradually decay, in other words, more and more powerless. >>>More
Carpentry CNC lathes are not ten years or eight years, and it is impossible to get a high salary, I just learned CNC control.
There are two types of inclined bed CNC lathe tailstock available: hydraulic and manual. >>>More
Panel furniture generally learned to be about 250 a day but not so dangerous, solid wood furniture learned tens of thousands of dollars a month, but very dangerous, basically everyone who made solid wood furniture was sawed to the hand, and some were sawed off.
The problem can be solved by the following methods:
1. CNC lathes focus on logic circuit control, and the mechanical mechanism is simple. >>>More