What s going on with the toilet bowl getting water all the time? I ve been like this for a while now

Originally, it was like that, maybe when the tap water pressure is large, the sound will be louder, the sound of the water pressure will be relatively smaller, the toilet flushes the water from the toilet, the water level of the toilet drops, the water level switch (the float falls down with the water level), the water level switch (the float falls down with the water level), the water flows into the toilet, the water is stored until the water level is full, and the switch is turned off (when the water flows, the water level of the toilet slowly rises, the float of the water level switch also slowly rises with the water level, and the float floats to the height of the water level when the water is full, and it is closed) The water stops flowing into the toilet, and the water is in the middle of the seeding, When the water level switch is turned on, the water will flow to the toilet, and there will be a sound of water flowing when the water level switch is turned off, and there will be no sound of running water when the water stops.

I closed the angle valve and let the water go.

If the piston is not closed tightly, take a look at the float valve, something may be stuck in the outlet pipe, leading to the rubber closing is not tight. Before the water leaks, just eliminate it. It is best to remove the float as a whole.

The level control is too high, and the float can be adjusted.

The float is not easy to use, and if you change a complete set, there will be more than 20 daily miscellaneous items.

That's it in itself, it's fine.