-
Anonymous users2024-01-231. Installation Environment: 1Before installation, the bathroom wall and floor tiles should have been constructed, and the water supply and drainage pipelines should be reserved. 2.The location of the sewer pipe should be in accordance with the installation position required for the urinal purchased.
-
Anonymous users2024-01-22Hanging urinals (buckets) in public restrooms. Its installation height is 600mm and 450mm for children.
-
Anonymous users2024-01-21The installation height of the hanging urinal must be moderate, the installation height of the hanging urinal in the general public toilet is about 30cm, which is for children, and the installation height of the hanging urinal used by adults is generally about 50cm.
At the flue position, a cement pressure plate is used and the whole wire fence is hung.
A flat chest is best, and it is easy to use. That's about one meter three.
The main tube is at least DN65 (2 inch half tube), and then transferred to the tube with DN32 (1 inch 2 tube) on each squatting toilet through tee.
It is necessary to determine first, otherwise slotting, downpipe, and waterproofing cannot be done, and the above cannot be done so that the wall and the ground cannot be done.
The height standard of the waterproof layer of the bathroom should be determined according to the different positions, first of all, the waterproof layer of the wall is generally 30 cm upwards from the corner of the wall, the height of the bathing place is generally 180 cm, the height of the basin is 100 cm, the waterproof layer and the ground waterproof are required to do 2 times, do not leave the construction joint in the corner of the wall when waterproofing, the ground waterproof layer should be painted out of the bathroom door 30 cm high, the waterproof floor waterproof layer should be 20 cm higher than the ground. >>>More