What to do if there are rust spots on the stainless steel countertop in the kitchen

You can rub it with five cleaning powders.

If you clean it often, don't pay too much attention to it, and change the brand if you are not happy to use it.

The minimum standard of stainless steel 201 is poor, and it may be 201, but it is also necessary to see where it is produced.

The place of production is very important, buy 201 board has also encountered the situation you said, there is generally no way to remove, the countertop should be brushed, it is recommended to use brushed cloth with the texture to pull a little better, but it will not be long before there will be black stains, it is best to use 304 stainless steel to make the countertop once and for all.

Stainless steel cabinets also depend on whether people will use them, I made a set of stainless steel cabinets with 201 stainless steel at home. , use it every day, occasionally there will be a little rust stain in the place where it is not wiped, and it will be wiped with a cloth. It's been two years, and it's as new as it just was.

Stainless steel sink rust prevention:

1. Before installation, the yellow muddy water and rust of the cabinet inlet pipe must be drained and flushed, so that the faucet will not be blocked, and the sink can be protected;

2. If it will not be used for a long time, please clean the sink thoroughly without leaving dirt and water stains;

3. Do not use corrosive liquid to clean the tank, although SUS304 has good anti-corrosion performance, but it is not invincible. After many removal tests on the rust spots and mildew spots on the surface of the sink, the following methods can effectively remove the floating rust and mildew spots on the surface of the sink:

1 .Remove with talcum powder (double fly powder): put a small handful of talcum powder into the dry sink and wipe it with a dry rag on the rust spots or mildew spots;

2 .Use detergent to remove: put a little detergent on a damp rag, or apply it directly to the floating rust spots or mildew spots, scrub vigorously and rinse with water;

3 .Use toothpaste to remove: squeeze out a small amount of toothpaste on the rust spots or mildew spots in the sink, and wipe it repeatedly with a dry rag;

4 .Remove with rust removal paste (water): Use a dry rag dipped in a small amount of rust removal paste (water) to gently wipe the serious rust part, and rinse it with water immediately.

After wiping it off with a rag after each use, apply some oil.

If there is a lot, it means that the quality of stainless steel is not good, there is no good way, if there is a place that does not appear in contact with the place, it may be caused by long-term corrosion of salt grains, fine sandpaper can be worn off, and a small scouring pad can also be wiped off.