The toilet drains slowly, there is no suction, and the basin goes down with a bang, what the hell?

The water level of the water tank should be low, and the high point can be adjusted to make the water storage capacity of the water tank more! That's fast!

Reasons and solutions for slow toilet draining without suction.

1. First of all, the quality of the toilet itself, may be because the manufacturer in order to get more profits, so the overall design cut corners, so that there will be poor suction when used, and the flushing effect of the toilet will be greatly reduced. In this case, you have to find the original manufacturer, and you need to replace the toilet with a new one.

2. Secondly, there may be a problem when the toilet is installed. There is a serious pit deviation during the installation of the toilet, which will also lead to the suction power of the toilet becoming smaller, which needs to re-correct the position of the toilet, and generally has to be dealt with by professional installers.

3. There is also a kind of toilet sewer pipe blockage, in this case, you can use a pipe dredge to dredge it yourself, if you solve it yourself, you don't need to find someone else to repair it, saving money and trouble. But it is still not dredged well, and you still have to ask professional dredging personnel to dredge.

4. There is also a situation that will cause the toilet to not pass too much water, and the suction power will become smaller. It is that the diameter of the original design of the sewer pipe is small, and the pipeline needs to be renovated in this case, and the project is relatively large.

Precautions when choosing a toilet.

1. Drainage method: whether it is the lower row or the back row.

2. Determine the distance between drainage walls (pit distance).

3. When choosing a toilet, it is necessary to observe whether the glaze of the toilet is uniform, whether there is color difference and obvious deformation, how glossy it is, and whether the surface defects (brown eyes, spots, cracks, dirt, etc.) can be strictly controlled. A well-glazed toilet is smooth, detailed, and flawless, and can still be as smooth as new after repeated rinsing. If the glaze quality is not good, it is easy for dirt to hang on the four walls of the toilet.

4. Determine the water consumption, less than or equal to 6 liters of water for the water-saving toilet, the general toilet water storage is adjustable, and the water consumption can be adjusted according to the characteristics of the family.

5. The toilet is divided into split and conjoined. Split toilets are generally small in size and suitable for bathrooms with small space. One-piece toilets have smooth lines and novel designs, and there are many styles to choose from.

6. Look at the internal drainage connectors. If the quality of the gasket and content link is poor, the toilet is not only easy to scale and block, but also easy to leak. The gasket should be made of rubber or foamed plastic, with relatively large elasticity and good sealing performance.

7. Look at the service. To choose reputable brand products, such as FAENZA, Wrigley, Megahua and other sanitary ware, manufacturers provide free installation services.

This is a common problem, you see if there is a small hole under the water in the toilet, half of the water comes out of the small hole when the tank is flushed, resulting in too little water and no suction, and the toilet is easy to block. If you pour the water yourself, the water comes from above, so the suction power is high.

The flange of the toilet is displaced and leaks, and it is re-installed once.