The electric switch at home didn t trip but suddenly the kitchen socket ran out, what happened?

The electric switch does not jump is not a loss, it means that it is not broken, you can use a multimeter or electric pen to measure whether there is electricity at the lower pin or trapped end of the circuit breaker, if the lower end is normal, the socket wiring is virtual, you can rewire.

The electrical wiring in the home is composed of multiple wirings, and one of them is faulty, and it is not that all of them are broken when there is a problem.

Many switch boxes have multiple sets of air switch control.

Probably, one of the groups tripped.

What's going on when there's no electricity at home but the power switch isn't jumping.

There are many reasons for the lack of electricity at home, and the electric switch is only one of the reasons, if there is no leakage or overload, the electric switch will not jump. Then you can check it by following the steps below:

1. Check whether the power fuse is broken, sometimes although there is no overcurrent and overload, the fuse contact is not good, resulting in a larger contact resistance, and the accumulated heat will also become larger, thus blowing the fuse.

2. Check whether the wire contact screws introduced from the meter into the home are loose. If the contact screw of the wire is loose, the joint may be oxidized over time, resulting in poor contact and no power at home.

3. In the same way, check whether the wire contact screws introduced into the meter are loose.

4. The current coil inside the meter is broken or the contact is not good.

Summary. The kitchen socket was out of power for a number of reasons. First check if there is a power outage.

If there is no electricity in the kitchen when there is an electricity bill in other rooms, you can unplug all electrical appliances in the kitchen, and then measure it with an electric pen to see if there is electricity, and consider whether it is caused by a short circuit in the kitchen appliances. If there is no electricity, you can check whether the power switch that controls the kitchen has tripped, and if it does, just push it up again. If none of the above reasons are true, you have to consider that it is a line problem, then you have to ask an electrician to deal with it, safety first.

Use a voltage tester to detect the socket first, if the 2 empty neon bubbles are bright, it means that the zero line is broken; If the 2 empty neon bubbles do not light up, it means that the fire wire is broken. Then check the lower mouth of the air switch of the distribution box, and measure the voltage with a multimeter to see if it is 220 volts.

The electric switch at home didn't trip but suddenly the kitchen socket ran out, what happened?

The electric switch at home did not trip Qiaochen Sail, but suddenly the kitchen socket ran out of power, brother, what happened? It should be a place with poor contact in the line, find an electrician to help find the hail and repair it!

The kitchen so the socket is out of power, what is the problem.

I looked at the kitchen socket and tripped, I pressed it, and there was still no power.

There are many reasons why the kitchen socket is not as electric. First check if there is a power outage. If there is no electricity in the kitchen when there is an electricity bill in other rooms, you can unplug all electrical appliances in the kitchen, and then measure it with an electric pen to see if there is electricity, and consider whether it is caused by a short circuit in the kitchen appliances.

If there is no electricity, you can check whether the power switch that controls the kitchen has tripped, and if it does, just push it up again. If the above reasons are not Chongsen, you have to consider that it is a line problem, then you have to ask an electrician to pay to deal with it, safety first. Use a voltage tester to detect the socket first, if the 2 empty neon bubbles are bright, it means that the zero line is broken; If the 2 empty neon bubbles do not light up, it means that the fire wire is broken.

Then check the lower mouth of the air switch of the distribution box, and measure the voltage with a multimeter to see if it is 220 volts.

The kitchen socket suddenly ran out of power, but there was no tripping problem; It should be that the socket has been used for a long time, the contact is poor, the contact is overheated, and the open circuit fault occurs, or the open circuit fault is caused by the poor contact of the branch contact part of the socket line.

Check whether there is electricity in other sockets, if there is no electricity in other sockets, check the empty opening of the distribution box, close the gate and try;

If there is electricity in other sockets, but there is no electricity in the kitchen socket, the wiring of the socket is off or broken.

In fact, there are two types of tripping: leakage protection switch tripping and air switch tripping. The leakage protection switch is the first line of defense in the home circuit, and it will trip as long as the circuit leaks; There are two reasons why the air switch trips, either it is a short circuit, or the current limit is too small.

The most direct way to insure: ask a professional electrician to check the leakage in the home circuit; When installing the line, you should pay attention to the design, it is generally recommended that the 2P air open as the main switch, to prevent the electrical load from burning out the line, causing accidents, the branch with leakage protection, if there is a line leakage trip, other branch circuits can still use electricity. Avoid the embarrassing and dangerous situation of the user above; When designing the circuit, the leakage switch and air opening should be selected according to the actual use of household appliances with a larger load, so as not to be insufficient; Don't be greedy for cheap, and you must buy good quality things that involve safety issues, so that you can feel at ease.

Check whether the socket is loosely connected and whether the socket is damaged.

The main switch did not jump, and the air opening of the control kitchen socket jumped.

The switch does not jump does not necessarily mean that it is not broken, you can use a multimeter or electric pen to measure whether the lower end of the circuit breaker has electricity, if the lower end is normal, the socket wiring is virtual, you can rewire.

It should be a place with poor contact in the line, find an electrician to help find and repair it!