-
Generally speaking, the bottom environmental humidity in contact with the floor will be slightly higher than the floor itself, so the floor moisture absorption and expansion cause mutual extrusion to cause cracking, and some cracking is related to the wood fiber of the material itself, which is difficult to avoid. If a large number of floors have large-scale cracks, it may be related to the processing technology, and the manufacturer should be contacted to solve the problem.
The blistering and peeling of the floor paint film are mostly caused by the moisture of the floor or the poor paint adhesion of the material itself, but it is not unrelated to the quality of the paint and the construction process.
-
If you have a quality problem with the floor, you can ask the dealer for rework or compensation.
-
If you have a quality problem with the floor, you can find a dealer.
-
Probably your floor is only 50 yuan square.
There are usually two causes, one is caused by moisture. That is to say, before installation, the floor was not cleaned, there were some small sally, or the floor was too rough. Therefore, after the installation of the floor, when we walk on the wooden floor, the moisture-proof film of the wooden floor and the balance layer on the back of the floor will be destroyed, and the moisture of the ground will enter and cause the floor to bulge. >>>More
1. Disassemble the ventilation and drying, remove the arch wood block and the surrounding floor to ventilate it, which can greatly alleviate the arch problem; Pry up the floor of the arch in a large area, wait for the backbone of the dragon on the ground, and then lay the floor back. >>>More
There are generally the following reasons for floor bulging: >>>More
Basically, it is caused by decoration or environment:
First, the edge of the solid wood floor is warped. >>>More
Handmade 100 yuan flooring depends on the price of your product. You can go to the flooring shop and find a worker to repair it.