-
Anonymous users2024-01-231. It may be affected by thermal expansion and cold contraction, and the tiles are squeezed due to the narrowness of the joints.
2. The tiles by the window may be wet in rain or the wall may seep water, which will cause penetration into the tiles, and cracks will appear inside and then crack.
Yipai tile will answer for you!
-
Anonymous users2024-01-22It stands to reason that it shouldn't, the tiles themselves are made of high-temperature firing, and the temperature of the sun is not so high.
It may be the quality of the tile, not to find a professional to identify more assured, if there is a problem to find the seller to claim.
Causes of tile cracking.
1: When the occupancy rate is high, the flue is used frequently and the thermal expansion and contraction are intensified, resulting in 2: If it is cracked at the 45-degree chamfer, it means that you are pasting an ordinary porcelain tile and it is caused by squeezing. >>>More
Child, it's just that the waterproof seal is not done well, this still needs to be asked?
The reason why windows on balconies are difficult to open is because the metal is rusty, or dirt is scratched into the tracks, preventing them from opening.
There are many reasons for cracking at the corners of the ceiling, and it is also a technical problem that is not too high! The main reasons are: 1. The stability of the plate is not good, also known as the shrinkage coefficient is too large; 2. THERE IS NO EXPANSION JOINT OR THE EXPANSION JOINT IS TOO SMALL, AND THE COMMON SEAM IS RESERVED FOR 3 5MM AS THE REFERENCE VALUE; 3. Without the elastic treatment of the seam, it is generally necessary to fill the elastic putty and seal it with kraft paper tape twice, and then do the general batch ash treatment on the surface; 4. The room is not ventilated or the temperature difference is too large, and the humidity is too large, and cracks will appear like rapid drying!
Gypsum powder is mixed with white latex or polyethylene glue, but there are anti-cracking products on the market that do not need to be adjusted, but the price is relatively high. And the effect is not as good as gypsum powder, fill the gaps after adjusting evenly, and then paste gauze tape on the outside (kraft paper is better than gauze tape, there is a new type of fiberglass mesh belt), and then scrape putty.