-
Anonymous users2024-01-23Based on the situation you described, that's actually quite explanatory. It's not too hard. First you put the first group.
The second group of heaters has a cut-out door in front of each of them. These two sets of radiators. To open a little less.
The second group is a little more open. So that the third group is hot. If it is the first and second groups, it is cooler.
On the point steam.
There are many reasons why the floor heating is not hot, such as air in the pipes, the water pressure is too small, the pipeline design is not reasonable, the pipes are uneven, or the pipes are too long? Or maybe the heat source isn't turned on, or the thermostat isn't set up properly? Wait, it is recommended to find an installation company to check (Shure floor heating), if you are central heating, it is recommended that you find a property to repair.
As long as there is no problem with the installation, the exhaust treatment can be carried out, and the gas in the radiator will cause the water circulation to be poor, and the radiator will not be hot, and the air in the radiator will be discharged.
Hello, this has nothing to do with wiring, it should be that the digital segment switch is broken. This group does not light up, check whether the output of this group is normal. >>>More
There are many reasons why the radiator is not hot, such as your installation location, the size of the radiator, the water problem of the boiler, whether the radiator pipeline is blocked, the water pressure problem, whether the pipeline is relatively small, resulting in a small water flow, etc., it is recommended that you find an installation company to see, the system is made by them, it should be able to be solved.
The height standard is generally divided into 300,495,660 mm and the depth including the door panel is 370 mm.