-
Pouring antifreeze into the water tank, or mixing alcohol and salt in the water, can reduce the freezing point of the water and effectively prevent freezing.
If all electric heaters are run on low temperatures, especially if the heating system is turned on in the bathroom and the bathroom does not freeze, you can eliminate the need for antifreeze in the toilet. In winter, in order to prevent freezing, please drain the remaining water when the toilet is not in use, close the water inlet valve, unscrew and remove the drain bolt, and tighten the drain bolt after the remaining water is drained, otherwise it will cause water leakage.
-
You can bring the water to a boil, then slowly introduce it into the toilet bowl to melt the ice in the toilet, then add a certain amount of salt, then pour in the boiling water repeatedly, pour in the salt water again, and a few more times, the ice in the water pipe will melt. Since the freezing point of salt water is lower than that of water, it is almost minus 9°. But if the temperature in that place is about -10°C at any given time, the ice will melt and it will freeze soon.
-
Pour in hot water slowly, you can't use boiling water to burst.
-
Boiled water, and then poured it into the frozen area, and it was all right.
-
Pouring hot water!!
Hello, 1. For small blockages, press up and down with a leather pinch on the sewage outlet and deal with it yourself. Be careful that there must be water in the toilet. >>>More
Then it depends on whether it is blocked, it is better if it is not blocked, if it is really blocked, there is a sewer, you can call for help, or you can find a property.
1. In fact, you can find a half-inch wide bamboo strip and stretch it into the toilet to dredge it to solve the problem. In many cases, the toilet flushes more and will drain itself, especially if it is a soluble or disposable item such as soil or paper. If it's greasy, then rinse a basin of boiling water to melt it. >>>More
Everyone knows what kind of role the toilet plays, if it is very troublesome to accidentally block it, the following will recommend several methods for you, you can refer to it: The steps to solve it are as follows: (1) Prepare props: >>>More