-
Anonymous users2024-01-23If the toilet is blocked and no water overflows, you can check it by the following methods: 1. See if there is a water trap in the pipe. Because the toilet itself has a trap, there is air between the two traps, and the air pressure cannot be pressed. So it is impossible to enter the water.
Solution: Open the vent at the back of the toilet.
2. If the toilet pipe is blocked, you can use a steel wire to wrap a spherical object of about 40MM, and you can stretch it in and keep winding it. It is also possible to please the property.
3. The sewer pipe is blocked, and the solution is to ask the property to dredge. Old-fashioned houses (mostly brick-concrete structures) use cast iron pipes for sewerage, which are small in diameter and easy to deposit debris.
It may be that there is a problem with your toilet, normally there will be a little pure water after the water flush out of the machine, which is in a state of wind, and it will also prevent some smelly smells from going up.
The toilet is clogged and the water is flowing backwardsToilet blockage is generally a blockage at the toilet trap, and the best and easiest way is... >>>More
You can try to flush it, just add the product to the toilet, and then add the corresponding water, after about 20 minutes, flush it with a lot of water, it's very simple.
The first is to pour part of the detergent to increase the lubrication in the pipeline, and then try to flush with water. >>>More
1. The toilet is blocked, generally there is a foreign body blocking the flushing pipe, resulting in poor water flow and cannot be flushed, at this time, you should first check whether the sewer pipe is unobstructed, if the sewer pipe is blocked, then let the professional master to overhaul the entire sewer pipe and fully drain the blockage. >>>More