After the renovation was completed, I found that the socket of the bathroom water heater only had tw

All household appliances with metal shells must have a ground wire to be safe and prevent leakage from hurting people. If it has been specially decorated only to find that there is no ground wire, it is very non-standard and must be there. If not, you can only pull a separate cable from the nearest socket with a ground wire to the bathroom.

Sure, it's ugly, but it's safer than no ground wire. You can also find a decoration company to open the trunking and re-wiring. This looks better than pulling the cord alone, but you may also see a little repair marks in the patched area.

FYI.

There is no protected bai

line, from the point of view of safety of use.

du, there is a potential safety hazard, the protection of the dao ground wire is in the case of failure of the electrical element internals, the only measure that can ensure safety, see if there is a ground wire in the junction box, if there is a best link. The two wires are connected to the socket L binding post and the neutral wire is connected to the N binding post. But pay special attention:

Without a grounding wire, a leakage protector (also on the plug on an electric water heater) will not work (i.e., it will not trip without ground wire leakage protection), so in case of leakage bathing, you may be electrocuted! Remember: unplug and shower.

It's best if you find an electrician to reconnect the power supply

It's best to find a way to bring in a ground wire, as appliances like water heaters need enclosure protection grounding to keep them safe.

After the renovation is completed, I found that the socket of the water heater in the bathroom only has two wires and no ground wire, what should I do? Which one helps to answer, solve.

Hello, if your bathroom water heater socket has only two wires and no ground wire, this is a very dangerous situation. Because the ground wire is one of the important measures to protect personal safety, if there is no ground wire, once the electrical leakage, the human body will become the path of electric current, resulting in electric shock accidents. Therefore, it is recommended that you find a professional electrician for inspection and modification as soon as possible.

The electrician can solve this problem by rewiring or adding a ground wire. You'd better not use your bathroom water heater before doing a makeover to avoid accidents. In short, the bathroom water heater socket does not have a ground wire to slip is a very dangerous situation, and it is necessary to find a professional electrician in time to renovate.