-
Anonymous users2024-01-23Cut the glue of the corner with a knife and then disassemble it, du has a buckle zhi stuck on the keel, and pull down a little bit to go down the version.
Negative Angle Content:
If the aluminum buckle board is to be used for the cladding beam and the secondary ceiling, the yin angle line or the yang angle line plays the role of the corner, and the yin angle line is the inner corner edge strip, most of which are T-shaped.
The corner line of the ceiling is finally fixed at the junction of the wall tile and the gusset with glue after the gusset is installed. If the disassembly can only be forcibly removed, it may be damaged. However, reinstallation is simple and inexpensive.
The last piece is determined, cut the size, and if there is a notch, just insert it inside.
Materials required to remove the long strip plastic gusset in the bathroom: >>>More
Of course, this needs to be sewn, it must be good for Fengtai, not bad for sewing.
The light strip must be a gypsum board modeling top, and the light strip groove can be reserved to be installed, and the PvC gusset is not easy to press.
1. The horizontal line ink line of the ceiling, the corners are installed according to the ink line, 2. The hanging bar is played and the keel is installed; (The kitchen and bathroom area at home are small, and you can do without a keel). >>>More