How to connect two routers, one in the bedroom and one in the living room, how to practice connectin

Updated on Living room 2024-04-24
2 answers
  1. Anonymous users2024-01-23

    Key settings for multi-router wired bridging: (primary router, secondary router, secondary router).

    Change the login IP address of the router to prevent conflicts between the login IP addresses of the device.

    If the network cable is connected to the WAN port of the secondary router, the WAN port of the secondary router uses the dynamic IP connection type, and the WIFI of the secondary router can be used normally.

    If the network cable is connected to the LAN port of the sub-router, it can be used directly without modifying any settings, but the Wi-Fi of the sub-router cannot be used normally.

    The primary router is responsible for dialing, managing and sharing the network and must start the DHCP service.

    The WAN port connection type of the secondary router is recommended to use the dynamic IP + automatic connection mode.

    The secondary router and the primary router must disable the DHCP service of the former on the same network segment, and the DHCP service of the former must be enabled on different network segments.

    The network cable is not ready to be used when it is connected, and the bridge mode can only use the network cable of the cross-connect sequence.

    Note: The LAN port of the main router is connected to the LAN port of the secondary router, and the secondary router is only used as a switch, and the wireless function cannot be used normally. If you want to use the wireless function of the secondary router, it can only be the LAN port of the main router - the WAN port of the secondary router; The first 3 digits of the login IP of the primary and secondary routers are the same network segment, and the different ones are different network segments. If you are using a wireless bridge, you need to add an explanation, because the setup is different; If you are satisfied, please give points!

  2. Anonymous users2024-01-22

    Tap from the router and pull it off!

Related questions
There are two routers in the house, one in the living room and one in the bedroom, and now both rout
1 answers2024-04-24

The primary route is set with automatic dialing and output IP addresses, and the IP address is assigned to the subordinate route, and the secondary route is set with the wiring mode and output network segment.

There are two routers in the house, one in the living room, one in the bedroom, and how to adjust it
1 answers2024-04-24

Change the IP segment of the second wireless router to avoid conflicts with the IP segment of the first router. >>>More

How to connect the two routers in the living room and bedroom
11 answers2024-04-24

First, define your two routers, the first one is Router A and the second Router B. The premise is that Router A has been set up to access the Internet normally (connected to optical fiber access or ADSL modem). >>>More

There are two routers in the house, one in the living room and one in the room, and I want to set th
3 answers2024-04-24

Connect your computer to the router you want to modify with a network cable, then enter the run command CMD, enter arp -a in the DOS window and press enter, check the IP address of that router. Then it's time to set it up.

Two routers are set up, one for the room and one for the living room
3 answers2024-04-24

The first IP is set, the second is set, the second router turns off DHCP, after the WDS is turned on in the wireless interface, the SSID of the first one is the name of the first server, and the password test and password must be the same as the first router, and the first computer should also be set up in the same way, but there is no need to enter the password.