-
Anonymous users2024-01-23Theoretically, strictly speaking, it is most power-efficient not to use!
If the boot time is before 6 p.m., then: turn on the machine half an hour in advance, close the door, close the window, and close the curtains;
If the machine is turned on at night, open the windows to ventilate before turning on the machine, then close the doors, close the windows, close the curtains, and close the kitchen sliding door.
-
Anonymous users2024-01-22Close the doors and windows to reduce temperature loss, and adjust the temperature of the air conditioner to degrees.
Acidic cleaning agents such as white vinegar and dilute hydrochloric acid can be used. >>>More
Recommended method of action:
First check the connection and installation of floor drain, basin sewer pipe, toilet and sewer pipe, seal the place where the seal is not tight, and replace the floor drain without anti-odor function with an anti-odor floor drain with a water seal to ensure that when using the exhaust fan, the dirty air in the main sewer will not flow into the room through the toilet sewer pipe, basin sewer pipe, floor drain port, etc. >>>More
Compare the performance ratio of air conditioners and the price difference As the saying goes, "you get what you pay for", good goods are not cheap, cheap goods are not good, although this may not all apply, but to a certain extent, it is true. Therefore, we should carefully compare the performance ratio and price difference of air conditioner before buying an air conditioner. The higher the performance ratio of the air conditioner, the better the technology, the better the quality of the air conditioner, and when comparing the price of the air conditioner, we must understand that the price of the air conditioner depends on the air conditioner itself, and secondly, it will fluctuate because of its assembly materials and assembly level, so don't be greedy.
Start by squeezing an appropriate amount of toothpaste on the brush and then brush directly the joints of the tiles. The amount of toothpaste can be determined according to the actual situation of the oil stain at the tile joint, because the direction of the tile joint is longitudinal, so when brushing, it should also be brushed longitudinally, so that the oil can be brushed clean. The main raw materials at the tile junction are putty and white cement, so it is difficult to scrub the oil anvil after being attached to it, and toothpaste has a strong cleaning effect, so it is chosen as a cleaning tool. >>>More
Find a worker to open the floor tiles near the toilet, and then put down a pipe under the toilet, the slope is better to be larger, otherwise the water will not be smooth when using some foam. It doesn't matter if it's a man, men use more water and less foam of all kinds hahaha. Then re-apply the cement and add some glue, which can also play a waterproof function.