How to deal with the leakage in the toilet squatting pit should be the gap between the toilet outlet

Updated on Toilets 2024-04-21
2 answers
  1. Anonymous users2024-01-23

    It should be a leak in the water tank switch, which is mostly caused by the accumulation of scale, if you are not familiar with this, you can ask a professional for help.

  2. Anonymous users2024-01-22

    Let's find a plumber.

    It's hard to deal with yourself.

Related questions
8 answers2024-04-21

Buy a small bag of quartz sand and apply the white tile caulk evenly to the crevices. >>>More

2 answers2024-04-21

From the picture you provide, you can't see whether it is the embedded dark pipe problem or the copper elbow is not installed and leaking, or the angle valve and hose are not installed and the leakage water, it is best that you can make it clear, if it is the embedded pipe leakage, the problem is big (but the general situation will not appear), if it is the installation of those pipe fittings or angle valves are not installed This is much simpler, turn off the main valve of the water, remove the subdivision and angle valve and reinstall it, as shown in the picture, To remove the copper elbow may first have to remove the toilet, I suggest that you do a good job outside to call a professional plumbing maintenance personnel to repair the door, a problem to solve, the general corridor or property of the propaganda column has the relevant maintenance of someone contact information, there is to go to the local building materials market to find a business that sells sanitary ware, they have professional maintenance personnel.

4 answers2024-04-21

Let's take a look at the location of the leak, whether it is near the washbasin drain or the toilet drain. Open the U-bend of the drainage pipe on the ceiling downstairs, put away the dirty water, if it is a leaking toilet drain, turn off the toilet water valve, drain all the water in the toilet, use the toilet suction to blow off the water in the toilet drainage, if not, use a rag to absorb water, in short, it should be dry. x0d x0a Step 2: >>>More

1 answers2024-04-21

It's too general. Whether it's a leak in the pipe, or a leak in the floor, there must be a source of leakage.

13 answers2024-04-21

To manage a kitchen leak, you must first identify the cause of the leak. When there is a problem with the waterproofing layer, there are usually two methods, one is to store water locally, and the other is to waterproof it as a whole. However, not all water leaks can be solved with traps, and in the case of water leaks, it is not necessary to re-waterproof the whole situation, and the specific situation must be analyzed on a case-by-case basis >>>More