-
Anonymous users2024-01-23Floor drain, next to the toilet pipe, first wipe it with the drain king and cement mortar, and then brush the waterproof paint on the ground to the wall 20 cm, the wall of the shower area is best brushed, after brushing, use cement to block the threshold and pour the appropriate amount of water to test the water for 24 hours to ensure that the water does not leak!
-
Anonymous users2024-01-22There is no problem to do according to the specifications, but the choice of waterproof materials is exquisite, since the use of geothermal heat, ABS, polyurethane and other materials are not recommended, you can choose JS, K11, can be constructed with water, simple operation, not easy to have problems!
In addition, it is debatable whether the kitchen is waterproof.
-
Anonymous users2024-01-21It seems a bit unexplained.
It is recommended that you treat the nozzle first, first make a waterproof layer (polyurethane, polymer waterproof coating can be) and then apply bricks, and the material of the tiles is waterproof.
-
Anonymous users2024-01-20The waterproofing of the bathroom should be done before doing geothermal heat, under the heat pipe, that is, also doing waterproofing, after doing geothermal, the heat will run up, waterproof on the top, one is not conducive to heating and heat dissipation, and the second is sometimes the waterproof material (mainly asphalt) is overheated, repeated thermal expansion and contraction make it invalid, and once the geothermal leakage will affect the downstairs.
-
Anonymous users2024-01-19Personally, it is recommended that the ground with geothermal heat should not be tiled, and the thickness of the bricks is large, and it is not suitable for geothermal equipment to play its function. It is recommended that you switch to solid wood flooring.
-
Anonymous users2024-01-18According to the construction requirements, the key parts: such as the wall pipe and other parts are done carefully. No problem.
The bathroom is waterproof, and the surrounding walls need to be painted at a height of not less than 30 cm; If there is a shower, the height of the waterproof paint applied on the installation of the shower faucet and the adjacent wall should not be less than 150 cm, preferably about 180 cm. >>>More
Bathroom waterproofing, it is recommended to do it three times, the first use of Yijia waterproof coating, that is, the above questioner said, the use of non-woven materials coated on top. The second is mortar cement, such as the famous brand Laoyar produced in Shenyang. Mix cement to do waterproofing. >>>More
First do the water and electricity transformation in the bathroom, the tap water pipe pressure test "8-10 kg half an hour without leakage", and then do the waterproof treatment "closed water experiment at least 12 hours", and then you can pave the floor heating, and the floor heating is paved with a thermal insulation layer under the floor heating, which will not affect the waterproof coating.
Here's how:
1. Use cement mortar on the ground to find a slope in the direction of floor drain, but the surface should be smooth. The slope near the entrance is small, and the slope near the floor drain is large. >>>More
First, use a brown brush.
Second, waterproof coatings are special materials. >>>More