-
Anonymous users2024-01-23It must be disassembled for cleaning. If necessary, some parts need to be cleaned with anhydrous alcohol.
-
Anonymous users2024-01-22Don't ask for the phone, deduct the battery, drain the water, dry it with a hair dryer for a period of time before turning it on, take it out and sell it.
Listen to my method, very practical :
Don't be in a hurry to turn on the phone, take out the card, and then take a bag of rice, cover the phone and bury it all, in this case, you go to the mobile phone store is not very good, people have to disassemble the phone to dry the water, and it also costs a lot of money. >>>More
The correct way to deal with the phone falling into the toilet: >>>More
First of all, I don't repair the machine in the toilet, the mobile phone liquid inlet depends on the composition, this kind of liquid inlet is more disgusting and your machine must be charged and corroded, the consequences will be more complicated, generally repaired without warranty, analysis of your current situation should be the motherboard is working normally is a problem with the screen connection part. This requires careful motherboard measurement (display part), the general liquid inlet display problem is that the display IC is disconnected or the screen interface is corroded, depending on the specific situation of the motherboard, if the level of maintenance personnel can be repaired! There are many unforeseen circumstances, so the outcome is not certain. >>>More
Just blow dry and everything will be fine. However, don't rush to use it when salvage. Otherwise, it may be short-circuited and exploded. Take care of your own safety.
In a situation like this, after scooping it up, don't turn it on first, otherwise it will burn the circuit board, and you should use a hair dryer to dry it before turning it on.